Concept is Easy
- Easy to gather parts.
- Easy to 3D print.
- Easy to assemble.
- Easy to program.
Simple Basic Parts
- (x1) Raspberry Pi Pico W (Wifi, with pin header)
- (x1) Kitronik Simply Servos Board for Raspberry Pi Pico 5339
- (x8) Servo (TowerPro SG90 or Miuzei MS18 or Feetech FS90)
- (x4) AAA Rechargeable Batteries 1.2V or alkaline 1.5V
- (x1) AAAx4 Battery Case
- (x4) M2x8mm Machine Screws with Countersunk Head
- (x80) M2x4mm Tapping screws
For head LED (not required if you don't need LED)
- (x2) 3mm LED (built-in resistor type or regular with resistor)
- (x3) Jumper Wires (female to female) about 10cm
- (x3) Right angle pin header