Home / aheadrc / Designs / Crawler C23 “Workhorse” 1/10 RC Body

Crawler C23 “Workhorse” 1/10 RC Body

By AheadRC

90% goes to the Creator
(excluding payment processing fees)

$12.00

Add to Cart

Videos

Images

Documentation

Technical

Assembly instructions:

View the link below to download the assembly instructions

aheadrc.com/manual

Designed to be printer friendly, the parts come in a variety of included options.

Cab:

Cab uncut (cab and roof are a 1 piece print. Requires a printer that can print a minimum of 155x210x185mm)
Cab cut (splits cab and roof into 2 piece print. Requires a printer that can print a minimum of 155x210x165mm)

Doors:

Mock hinge (lookalike hinges can be mounted, but door cannot be opened)
Hinge alt. Version (flat sections on mock hinge to allow mounting of real hinges. Please use the appropriate “alt. Version” doors for use with “alt. Version” hinges.

Grille:

Big mesh grille (grille is opened and shows only the grille mesh)
Grille alt. Version (grille with bars going across)

Bumper:

Bumper (wide rectangular bars)
Bumper alt. Version (Rectangular bars with angled lowers for better clearance)

Some files will need to be printed multiple times, this includes the following:

Door handle x2
Big orange (fender lights) x2
Small orange (fender lights) x4
Headlight lens x2
Mock cab lights x5
Windshield hinge x2
Cab side bolts x8
Handlebar x2
Non threaded wipers x2
Bumper lens x2
Mirror x2
Mirror mount lower x2

DXF files can be found here: https://www.aheadrc.com/dxf-files

*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*

Should you need any help, please do not hesitate to contact us!