Thanks for downloading!
We'd love to hear from you if the print was successful.
15 tooth/groove type L timing belt pulley
This is a companion to the 60 tooth pulley. It fits 3/8" pitch x 1/2" wide type L timing belt and has a 1/4" bore to fit on a NEMA-23 stepper motor.Maker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is a companion to the 60 tooth pulley. It fits 3/8" pitch x 1/2" wide type L timing belt and has a 1/4" bore to fit on a NEMA-23 stepper motor.
I printed at 20% infill, 0.25mm layers, 3 perimeters and 3 top/bottom layers. I used the same XY scaling in slic3r as I used for the 60 tooth pulley to print this (-0.2mm).
Original file is shared at OnShape:
Materials and methods
- about 17 g of ABS
- 1x 6-32 screw
- 1x 6-32 nylon lock nut
Issues are used to track todos, bugs or requests. To get started, you could create an issue.