Thanks for downloading!
We'd love to hear from you if the print was successful.
Baseplate for Makita Trimmer Router RT0700C
Baseplate for Makita Trimmer Router RT0700C. Simple baseplate for the Standard Base.
Maker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Simple Baseplate, nothing to special about it.
I just needed a baseplate and I was to lazy to make one out of Plexiglas or wood. I printed this one in PLA with 50% Infill. I sanded the PLA with 240 grid, to make it nice and smooth.
I also added a file for the screw hole placements, because they are placed kinda stange - in a non rectangular.pattern. Why Makita why?
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
Georg Kettele commented agoTo answer the question myself - no it is not in the center
Georg Kettele commented agoHi - one question is the drill center position directly on the intersection point of the two diagonals? I used your dxf and made 2 diagonals from one hole center point to the other. Thanks for the work. I need to laser cut a jig and it has to be pretty precise
UltiArjan printed this ago
- Printed on:
- Ultimaker - The Ultimaker 2
- Result:
- all the hole lined up perfectly, thanks for saving me the measurement of these illogically placed holes..
- Feedback:
- printed it quick and dirty with the 0.8 nozzle, layer 0.25
Tharin published this design ago