×Read this message from Erik, founder of YouMagine

Coffee Filter Caddy

Lidded box for holding paper coffee filters of the "Melitta" variety.

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

Since I buy my filters in bulk, I needed a nice little box to leave some in on the kitchen counter.

Materials and methods

STLs are sized for #4 Melitta filters. You could scale the files for other filter sizes, but for the sake of keeping the hinges round and of a good size it is better to use the SCAD file to create new STL files for the proper size. The design is parameterized and the variables are documented. You will likely want to change the values for wd, dp, ht, and droop.

Printed at 100% infill in PLA. Walls are 1.6mm (as per thk parameter) so infill % doesn't matter much if your wall thickness is at least 0.8mm.

I prefer to print the parts separately since the base does not need any brim, but the lid benefits from a small brim to keep the hinge area from curling up.