Thanks for downloading!
We'd love to hear from you if the print was successful.
ESP32-Cam for fischertechnik
fischertechnik compatible case for Ai-Thinker ESP32-CAM Module (and ESP32-CAM-MB USB Module)
Games
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Meant to be used with Ai-Thinker ESP32-CAM Module. For easy programming, you can temporarily attach the ESP32-CAM-MB USB Module at the bottom. The case also allows usage of the SD card slot, the flash LED, and an external antenna.
The ft-compatible I2C slot is optional, I connected it directly to pins 26 (sda) and 27 (scl) of the ESP32-S module, i.e. the I2C bus the module itself uses to access the camera's control interface at 0x30 . If you don't plan on using the SD-card, you could also use two of the pins 12-15 at the left of the module.
Feel free to comment if you need further details on wiring or materials.
Materials and methods
Ai-Thinker ESP32-CAM module with ESP32-CAM-MB USB/FTDI module
3 ft-compatible "Bundhülsen" 9,5mm
thin wires (AWG 30)
2x6 pin headers and 9x2 perfboard for I2C connector
Documents
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
juh3D published this design ago