Thanks for downloading!
We'd love to hear from you if the print was successful.
Face shield on frames with ability to rotate the shield. Holds well. For 0.5 petg sheets.COVID19
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Face shield on frames with ability to rotate the shield. Holds well. For 0.5 petg or apet sheets. If you have a shortage of those contact us, we have now plenty.
Thanks to 3D Creative, Rytis Mikalauskas for modeling!
We're also selling them for business to better shield themselves at: www.rm7.lt
Added updated version 12 that allows for a more robust holding if you have a hole puncher or a laser cutter, as well as longer and stronger legs.
Materials and methods
laser cut petg shield (or similar transparent material), use a lot of force to get it in.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
C'est du bon travail !
MERCI à vous .
- Printed on:
- Flashforge - Creator 2
- Super! They are gonna test it at a hospital to se if it could work during this crises
- greate design!, It really helps not beeing to reliable on elastic bands and if you use a laminated shield it can be reused instead of beeing one time use only. Would be greate with an optional "shield" over the top to minimice the amount of droplets(from a sneez) to fall down into the eyes
- Printed on:
- My printer is the da Vinci Jr. 1.0 3-in-1 model. This design is perfect for this small printer (150 x 150 x 150), I have not found any other of a suitable size for this printer. It would be wonderful if you could design, as a separate piece to fit this design, a peak that would protect the eyes. It should not exceed 150 mm to be able to print on this model.
In response to the COVID19 pandemic, European Norms regarding face masks are now published free of charge. This link pertains to personal eye protection:
Another tip in case of using this as a last-resort: PET bottle can also be a source of a fairly strong PET sheet! The curvature might not be idea, but thermal treatment could help there.