Installation information:
The bar fenders will require you to cut of the stock fenders. The bar fenders can be glued (Shoegoo or E6000) to the body and/or screwed with M1.5x5mm screws (34).
To install the supercharged V8, you will need to remove the stock radiator. A template is also included to show where the hood needs to be cut. Please make sure you print 1:1 and check the dimensions on the template (in mm) before cutting the lexan hood.
All parts are fitted with standard VP hardware. You will need a combination of M2.6x5mm (10) and M3x8mm (12) to install all the parts (screws are sold seperately).