Thanks for downloading!
We'd love to hear from you if the print was successful.
Indestructible Tiny Whoop TPU Ultimaker 90mm 2S
Tiny Whoop TPU Ultimaker
Gadget
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Here is an indestructible version of the Tiny Whoop 90mm 2S TPU Ultimaker .
The chassis and the protection camera are in TPU
The top-plate and the lipo fixing are printed abs or polycarbonate to rigidify the whole of the chassis.
The TPU parts can also be made of ninja semi-flex
Camera protection:
It is very easy to adjust the tilt of the camera and it can fall back in case of shock.
The TPU camera envelope + the headband made directly from the 3D coil wire
There are versions in wire of 2.75 mm and in wire of 1.75mm
There are several versions for the TX01 and 02 and for the TX03 which is larger
Here is the list of components tiny Whoop:
Receiver Sbus:
https://hobbyking.com/fr_fr/turnigy-nano-tech-300mah-2s-45-90c-lipo-pack.html
Lipo 2s 30mah 45-90C:
https://hobbyking.com/fr_fr/turnigy-nano-tech-300mah-2s-45-90c-lipo-pack.html
Screws and fixing nuts 4x m 1.6 16 mm
Here is the list of components Camera:
camera eachine TX01 / 25mW:
http://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=LD020411878172015024
Camera eachine TX02 / 200mw:
http://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?p=LD020411878172015024
Camera eachine TX03 25mw/50mw / 200mw:
Screws 2 x m 1.6 10 mm
Materials and methods
TPU ultimaker: 235Β°/70Β° max: 50mm/s
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.