IOS/Android Tablet & Phone Simple Wall Mount (Ipad/Samsung etc)
IOS/Android Tablet & Phone Simple Wall Mount (Ipad/Samsung etc)Gadget
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
A model I made for various tablets and phone devices to the wall for charging or use for easy touch screen access.
I personally use a pair for an Ipad Pro and a Samsung S3 tablet. The slide is about 9.5mm across so you can figure if you have a device with a cover, as long as it's thickness is less than that, it should still be able to fit. Since without any covers the devices still have some room.
I usually feed the charging cord through one of the slots when not in use.
Print model on the side with opening facing up, no supports needed.
Materials and methods
Print a pair and adjust on the wall accordingly. Hole for screw is just under 4mm diameter depending on your print layer accuracy.
Opening/slot where tablets and devices slide into is approx: 9.5mm.Total overall model length is just about 75mm.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.