Raspberry Pi 3/3+ Case (No supports - one piece)

Raspberry Pi 3/3+ Case (No supports - one piece)


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


Raspberry Pi 3/3B+ Case

Designed this to print in one piece, with no support material needed (when orientated in the vertical position). I included an area for a mounting screw since the stability from a second screw is usually made up for by the wiring. So this was an attempt to conserve space and function at the same time.

Slides in and out one direction, all board inputs are accessible and taken into account during design.

Enjoy and comment about any issues/requests!

Materials and methods

Printer Brand: Creality Ender 3 Pro
Supports: No
Resolution: 0.2-0.3
Infill: 20+%
Filament: IC3D PLA/PETG Black



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


E764c11a46040aac9bf9978cebfe3048?default=blank&size=40relentlessmetronome added this to the Pi / Arduino collection ago
Mini 20190217 142759the3dcoder commented ago

Version without the mounting area here:


6ebd690d648f37130c7dda157b4eabe1?default=blank&size=40Henrik Nielsen added this to the Things to print collection ago
F39f3fbc45d5dde1c58cff3fde67b4fe?default=blank&size=403DiY added this to the Raspberry Pi 3B collection ago
Beb0819f6d265ce5119ce2ce3c8291bd?default=blank&size=40WidowmakerPT added this to the Rpi collection ago
Faa10debbe18c75362be23d801805f08?default=blank&size=40Pablo San Juan added this to the Raspberry Pi collection ago
B7cc667331cc540f9dfe48952ff3bc23?default=blank&size=40Erutan409 added this to the Raspberry Pi collection ago
2073759164be4715fc67f5c071a3dc8c?default=blank&size=40Ping added this to the Vrac collection ago
Mini img 20160616 214649728ltmhenrique added this to the Tecno collection ago
B32f48b34309a037a4017abb6e13666b?default=blank&size=40Adrian Beavers added this to the To make collection ago
Mini 20190217 142759the3dcoder added this to the 3D4U Designs collection ago
Mini 20190217 142759the3dcoder printed this ago
Carousel thumb 20190209 142144
Printed on:
Creality Ender-3
Showing the proper print orientation of the print model.
Be sure to print standing up.
Mini 20190217 142759the3dcoder published this design ago