Thanks for downloading!
We'd love to hear from you if the print was successful.
Robo3D Camera Mount Platform
Mounts to bed support on front or rear of Robo3D R1 and provides a platform to mount a camera. Uses a ¼ x 20 tripod screw to affix camera.3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This camera mount attaches to the front (or rear) bed platform support and allows any tripod socketed camera to mount in front of the print bed. Replace the existing M4 screw holding the tension block with one 10 mm longer. The remaining hole will receive a M4 x 15 mm screw and nut to affix the camera platform. The tabs are to assist in preventing twisting. Print with at least 20% infill and upside down. It will print with no supports.
IGES and STEP files included if you care to remix or redesign this model.
Materials and methods
M4 x 15 mm screw and nut. M4 screw 10 mm longer than original affixing the Y Axis tension block.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.