Thanks for downloading!
We'd love to hear from you if the print was successful.
SUPERMAN LED Light/Nightlight
SUPERMAN LED Light/NightlightMaker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Here's a video of it in action...
This is a extruded LED SuperMan Logo I printed on my dual extruder... I took a JPEG of the SuperMan Logo and traced it in Solidworks... I then extruded and filleted the SuperMan Logo and saved it as its own STL to be used in dual extrusion... I then designed a plate around the SuperMan Logo, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and SuperMan Logo, the shell has aligned screw holes so it can be fastened to the plate...
I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the SuperMan Logo... I used Bendlay because it is extremely translucent (91% of light passes through)...
I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...
Here's some links to other LED logos I made like this one...
Transformers Autobot - https://www.youmagine.com/designs/autobot-transformers-led-nightlight-lamp
Transformers Decepticon - https://www.youmagine.com/designs/decepticon-transformers-led-nightlight-lamp
MakerFaire Robot - https://www.youmagine.com/designs/maker-faire-led-robot-sign-nightlight
Materials and methods
Issues are used to track todos, bugs or requests. To get started, you could create an issue.