Thanks for downloading!
We'd love to hear from you if the print was successful.
2.5" to 3.5" ssd (7mm height) adapter
This is an adapter to assemble a 2.5", 7mm SSD into a 3.5" disk bay
Other
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
This is an adapter to assemble a 2.5", 7mm SSD into a 3.5" disk bay. I have an Fantec Raid 4x enclosure, where this fits perfectly in. Prints with no additional adhesion (brim/raft).
The support can be easily removed with a plier. (shown pink in one of the pics)
I uploaded some earlier models, to show the designing process.
Materials and methods
The following parameters I used on an ultimaker 2:
[profile]
layer_height = 0.1
wall_thickness = 0.8
retraction_enable = True
solid_layer_thickness = 0.6
fill_density = 20
print_speed = 50
print_temperature = 210
print_temperature2 = 0
print_temperature3 = 0
print_temperature4 = 0
print_temperature5 = 0
print_bed_temperature = 70
support = Touching buildplate
platform_adhesion = None
support_dual_extrusion = Both
wipe_tower = False
wipe_tower_volume = 15
ooze_shield = False
filament_diameter = 2.85
filament_diameter2 = 0
filament_diameter3 = 0
filament_diameter4 = 0
filament_diameter5 = 0
filament_flow = 100.0
nozzle_size = 0.8
retraction_speed = 40.0
retraction_amount = 4.5
retraction_dual_amount = 16.5
retraction_min_travel = 1.5
retraction_combing = All
retraction_minimal_extrusion = 0.02
retraction_hop = 0.0
bottom_thickness = 0.3
layer0_width_factor = 100
object_sink = 0.0
overlap_dual = 0.15
travel_speed = 150.0
bottom_layer_speed = 20
infill_speed = 80
solidarea_speed = 15
inset0_speed = 30
insetx_speed = 60
cool_min_layer_time = 5
fan_enabled = True
skirt_line_count = 1
skirt_gap = 3.0
skirt_minimal_length = 150.0
fan_full_height = 0.5
fan_speed = 40
fan_speed_max = 60
cool_min_feedrate = 10
cool_head_lift = False
solid_top = True
solid_bottom = True
fill_overlap = 15
perimeter_before_infill = False
support_type = Lines
support_angle = 60
support_fill_rate = 50
support_xy_distance = 0.7
support_z_distance = 0.15
Documents
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
jsmith8045 added this to the Oganize/Management collection ago
Juan José Carmona Martinez added this to the My favorite collection collection ago
Greg Plamondon added this to the PC collection ago
kieranod added this to the Eletronics collection ago
suederi added this to the Computer Things collection ago
Ethan Engels added this to the Things to Print collection ago
chapelmagine added this to the mine collection ago
Technoplunk added this to the Electronics collection ago
Reiner Bühl added this to the Things to Make collection ago
ottomake published this design ago