This is a modular holder design for a full sets of<br>* Micro Mesh mini sanding pads,<br>* Micro Mesh Mini MX (down to 150MX),<br>* Micro Mesh regular sanding pads,<br>* 2x2 bottles of Mr.Putty filler with brushes<br>to let them dry and keep them sorted, organized and even comparable between MX and MM pads!<br><br>This keeps the tools for post-processing 3D prints organized.<br>The pads and brushes dry well, are sorted in order of grain and don't leave everything on your table dirty with fine dust.<br><br>Make all the parts you need and simply lock them into each other.<br>The keys are designed with +0.5mm allowance in each direction. So they do have a tiny wiggle room. This is intentional as not all printers out there have perfect dimensional accuracy.<br>The symbols mark roughly equivalent values for standard and MX pads for easy reference. MX pads are made of a harder material, so the numbers cannot be compared.<br><br>The Geomagic/Alibre files are parametric, so you can adapt the sizes to other bottle sizes or make modules for holding an airbrush or an array of sanding linen or -paper.
Creative Commons Attribution Noncommercial Share Alike