7.62x39 Dummy Round

A nearly perfect model of a 7.62x39 caliber cartridge for display and education.


Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


Haven't posted here in a while; the reason being I was trying to get a new 3d printer for the longest time. I now have a cr-10 mini and finally got it to print properly. So back to the actual print; it is a nearly identical model of a 7.62x39
cartridge. With the only thing off slightly being the case taper. If you get the temptation to stick this in an actual gun I wouldn't recommend using pla.

Materials and methods

I used pla with a layer height of 0.2mm at 225 C with a heated bed at 60 C. The entire print took about an hour.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini 20170818 101825Gianni F. commented ago

Looks like it turned out pretty good. My printer always ghosts or has some other artifact occur. Thanks for sharing your print!

0e40e3a0d53266d18945e97ed07c3bd8?default=blank&size=40Cosmin Buidan commented ago

Mine was also done with the CR-10 printer

0e40e3a0d53266d18945e97ed07c3bd8?default=blank&size=40Cosmin Buidan printed this ago
Carousel thumb 20190325 103322
Printed on:
Creality CR-10
Mini 20170818 101825Gianni F. published this design ago