Files are moved to
http://www.thingiverse.com/thing:724752

To beam A.M.E.E. from the virtual pixel matrix into the real world
it was necessary to modify all the parts e.g. add pins, replace
the gears, etc.
Followed by solving many troubles to get the right distances
between the parts and to prevent lock up of the moving bars.

Based on CAD design available on Grabcad
https://grabcad.com/library/animal-running-1

The silver version is a control print with the uploaded STL files
using PLA 25% fill density, 2 layer shell, 0.1mm layer height and
70% print speed in ~30 hours. Assembly time ~1,5 hours.

The timing for the motion profile can be set as you like.

High resolution image links
http://postimg.org/image/bqw8dfhil/full/
http://postimg.org/image/wgj7kjf4t/full/
http://postimg.org/image/i1ttghtd9/full/
http://postimg.org/image/jbpc6p5c1/full/
http://postimg.org/image/ze3c07at1/full/

Youtube video