Battery Discharger Case

a case for a standard battery discharger otherwise known as a capacity tester


Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


This is a discharger case (Capacity tester). Due to the cheapness of the discharger, some sanding or stl tweaking may be required for it to fit.
Added case with posts for 2.85mm screws (usually supplied) or 3mm screws
Added :: An alternate top with light tubes.. the tubes should be made of transparent pla or left empty. The Tube is forced into the hole and cut level with the top with side cutters

Materials and methods

I used PLA throughout. i had a slight issue with bottom layer thickness which shows in fine detail but it doesn't affect the case at all.
The top should be printed with the top side down..
3x Buttons (sticks) should be printed with a brim to prevent it moving on the build plate.
Please excuse the file names.. they were to help me during prototyping.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini young meStevie135s published this design ago