Thanks for downloading!
We'd love to hear from you if the print was successful.
Creality Blower Cooler
Improved cooling for CR-10S and similar hotends
3D printer parts and enhancements
Creative Commons Attribution Noncommercial No Derivatives
Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.
Description
Designed for the Creality CR-10S, this should fit all standard Creality printers. Should!
I've kept this as minimal as possible for light weight and for improved visibility of the printing part.
Upgraded part cooling with a 4020 blower fan — https://www.banggood.com/DC-12v-4020-Brushless-Sleeve-Bearing-Turbo-Blower-Cooling-Fan-with-XH2_54-2P-Cable-p-1425580.html — instead of the little standard one.
Also has room for an Aus3d IR probe: https://aus3d.com.au/ir-z-probe which is my current favourite levelling probe for glass beds (once you paint the bottom of the glass black!) (not sure how well it works when there's glue on the bed though)
Materials and methods
Prints without support, as long as it's lying on its back. Mine's PLA and I haven't had problems with it melting, but I always have the blower running.
Mounts to the X sled with the standard bolts. Re-uses the hotend fan, or you can fit a thicker, quieter one. You'll need M3 screws to mount both the fan and the blower, and the length will depend on the fans you choose.
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
