ESP8266 Case

This case is designed to host the ESP8266, a 0,96 Zoll OLED and the GY-BME280 sensor.


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


This case was designed to hold most KeeYees WiFi ESP8266 Weather Station Kit components and enable the user to hold business cards on its sides. The Programm Code is on their Website.

I also added the documantation in this post because you need to register if you want a building guide and dont forget to change the degree Symbols because the format is wrong if you copy and paste the code.

Also you need to drill the OLED hole with a M3 Drill and you need araound 4 M3 Screws to secure the componente.

Materials and methods

It is Printed with PLA but i guess you can print it with any plastic.
Layer height doesnt matter.
But print with easy to brake of supports.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


A013db2682fccdf8e9cd04d0d45a2a82?default=blank&size=40freudlos published this design ago