Thanks for downloading!
We'd love to hear from you if the print was successful.
Flexible tablet hanger
Flexible tablet hanger
Other
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
They are printed by MOST Delta 3-D printer http://www.appropedia.org/Athena_Build_Overview
PLA 1.75 mm Hatchbox
Fill Density 30%
print speed 30 (mm/s)
Layer height 0.2 (mm)
shell and bottom/top thickness 1 (mm)
Need to print
two for a corner top
two for a corner bottom
two for bar connector v2
two for bar connector v2-1
Need
1 meter of ribbon
4 for M4 x 45mm socket head cap screw
2 for M4 x 25mm socket head cap screw
How to use flexible tablet hanger
use the ribbon to tie all four corners together
or
use connector to connect between left and right corners for top and bottom
use ribbon for hanging
Materials and methods
They are printed by MOST Delta 3-D printer http://www.appropedia.org/Athena_Build_Overview
I used openSCAD to design all parts.
PLA 1.75 mm Hatchbox
Fill Density 30%
print speed 30 (mm/s)
Layer height 0.2 (mm)
shell and bottom/top thickness 1 (mm)
Need to print
- two for a corner top
- two for a corner bottom
- two for bar connector v2
- two for bar connector v2-1
you may print screw from this link http://www.thingiverse.com/thing:193647
Need
- 1 meter of ribbon
- 4 for M4 x 45mm socket head cap screw
- 2 for M4 x 25mm socket head cap screw
How to use flexible tablet hanger
- use the ribbon to tie all four corners together
or
- use connector to connect between left and right corners for top and bottom
- use ribbon for hanging
Documents
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
