Thanks for downloading!
We'd love to hear from you if the print was successful.
GoggleBox - spectacles case
A spectacles storage device!Gadget
Creative Commons Attribution Noncommercial No Derivatives
Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.
This is a two part case to store your glasses. There is a thumb tab on the rear of the case that unlocks the lid so that the case can be opened.
The shape of the case ensures that the lens of the inserted glasses has minimal contact with the walls and that it can be printed without supports.
The case will accomodate spectacles with a maximum height of 36mm and a folded length of 145mm.
Materials and methods
Printer: Ender 3
Resolution: 0.20 mm
Nozzle Temp: 240°
Bed Temp: 70°
Top Layers: 4
Bottom Layers: 3
I used 5 walls on this object to ensure a solid 3mm wall. Total print time is 8 hours 15 minutes for both sections. Print with the latch mechanism face on the print bed.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.