Hockey Stick Holder

Two of these holders will hold 2 hockey sticks wherever you decide to mount the holders.

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

The hockey stick holder was modeled using FreeCAD and then converted to a STL file and put through Cura to g-code the model to be printed. I did 40% fill and the estimated print time was 3 hours 6 minutes. Four screws need to be purchased to mount the holders. I used four 12 x 2 wood screws that costed $0.64 that was sourced from a hardware store. The print material cost estimate was $0.83. It costed a total of $1.47 to create 2 holders with the hardware.

Materials and methods

3D Printing
Wood Screws
Hockey Sticks

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

A4cd16d0d8e4e3500473a643d9f66319?default=blank&size=40ffco added this to the things_to_print collection ago
Db8df1623daad7d6cfed5a28d667e70d?default=blank&size=40dmswanso published this design ago