MakerFarm Simple Print Cooler

A cheap and cheerful print cooler for MakerFarm Prusa i3v printers

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

This is a cheap and simple print cooler solution for the MakerFarm Prusa series of printers. This was designed to mount to the side of the X-carriage using the existing mounting screw. A 40mm fan is mounted using M3 screws to the mount, and the fan duct is attached to the other side. This provides increased cooling to the project itself, with no modifications needed to the printer.

Printed at roughly 65mm/s with a 0.3 layer height and 0.4 infill.

Materials and methods

40mm Fan
M3 Screws (4)

Documents

Makerfarm Print Cooler V6 Mount
STL – 39 kb
Version 1 - Feb 04, 2015
Updated on 04-02-2015 – 0:19 h – 2 g – 40×46×3 mm
Edit in 3dslash
Version 1 - February 04, 2015 16:33
Download
Makerfarm Print Cooler V6 Shroud
STL – 16 kb
Version 1 - Feb 04, 2015
Updated on 04-02-2015 – 0:36 h – 3 g – 42×40×24 mm
Edit in 3dslash
Version 1 - February 04, 2015 16:33
Download

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

Dubai Bunnies added this to the Print collection 11 months ago

vrillusions added this to the Things to Print collection almost 2 years ago

Ryan Adams published this design over 3 years ago

Thanks for downloading!