Thanks for downloading!
We'd love to hear from you if the print was successful.
Overhead Bracket for Security Token
This bracket is for keeping the Digipass 831 security token from Postfinance at his assigned position.
For your home
Creative Commons Attribution
You can adapt, share or use this work commercially as long as you attribute the creator.
Description
This bracket is for keeping the Digipass 831 security token from Postfinance at his assigned position.
Always when I had to make some internet banking I searched my Digipass device from Postfinance. So i decided to to assign a fixe place where i store the Digipass. Because i already have many things on my desk t designed this brackte to store the Digipass underneath the desk surface.
This Bracket is designed for a Digipass with the measuring of 62mm with, 12mm height and approximately 90mm lenght. If you need some other dimensions, I can generate a *.stl for you.
Generally it is a general purpose bracket. It can also be mounted on a wall, either for putting the device in from above, or from the side. Mounted upstanding on the wall you can use your Digipass without removing it out of the bracket.
If you don't know what a Digipass is... go to https://www.vasco.com/products/two-factor-authenticators/hardware/card-readers/digipass-unconnected-readers.html
Materials and methods
Printed in PLA with 0.2mm layerheight. The wall thickness of the *.stl file is 1.2mm if you use an extrusion-with of 0.3mm and at least two perimeters, you will end up in a 100% infilled part without any additional infill, because there is no gap between the perimeters. (see print screen in the gallery)
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
