Protective Visor by 3DVerkstan

Protective visor optimized for fast FDM printing

COVID19

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Attribution

Erik Cederberg / 3DVerkstan

Description

For complete information, please check out the main site at http://Faceshield.nu

The plastic shield can be made out of any semi-stiff plastic sheet between 0.1 and 1mm, including overhead film, cover sheets for binding machines etc, as long as it is available in a suitable format.

There currently are 5 different versions. One for SWEDEN, two are for EUROPE, two for NORTH AMERICA and one compatible with the Prusa style laser cut shields.

Read more about the different versions:
https://3dverkstan.se/protective-visor/protective-visor-versions/

Please read the print guide for recommended settings
https://3dverkstan.se/protective-visor/protective-visor-print-guide/

If you need it to sit tighter on your head or if you are leaning over patients a lot and worry about it falling off, a simple rubber band or elastic hair band can be put over the two hooks in the back.

You need approx a 210x210mm build area to print two at a time, and about 160x190mm if you are OK with only doing one at a time.

Materials and methods

A4 sheet of transparent plastic (~0.2mm PET recommended)
Hole punch
3D Printer
A rigid filament
A rubber band (if desired)

Documents

  • Placeholder
    Europe 888
    ZIP  –  12 mb
    Version 1 - Apr 05, 2020
  • Placeholder
    Europe Iso838
    ZIP  –  12 mb
    Version 1 - Apr 05, 2020
  • Placeholder
    North America 3 Hole
    ZIP  –  11 mb
    Version 1 - Apr 05, 2020
  • Placeholder
    North America 6 Hole
    ZIP  –  14 mb
    Version 1 - Apr 09, 2020
  • Placeholder
    Prusa Compatible
    ZIP  –  11 mb
    Version 1 - Apr 06, 2020
  • Placeholder
    Sweden
    ZIP  –  20 mb
    Version 1 - Apr 09, 2020
  • Placeholder
    Top Covers
    ZIP  –  1.7 mb
    Version 2 - Apr 05, 2020

Comments

6215e97670edb3d538bd5b21396c5e66?default=blank&size=40Moez Maâmer added this to the Visiere collection ago
08ea9ea1ab20f0573d23f73381ca9c01?default=blank&size=40daniela commented ago

Hallo and thank you a lot,

am I the only one who would like to have a slightly wider shield? Say about 35-36 cm? Does anyone have experience with that? Would the design as-it-is work? All variants?

Or would it be better if it had two extra pegs? (which would not be used with A4 sheet)

Thank you so very much

Mini erik stickerErik Cederberg commented ago

@exlink: 20 minutes is not really reasonable on a Ender 3 Pro. The hotend and feeder is not up to that kind of flow rate, i believe the fastest we were able to make our Ender-3's do reliably at Stockholm Makerspace were about 35 minutes each with 0.8mm nozzle, PLA and a higher temperature than usual.

Our Ultimakers with 0.8mm nozzles were pushing them out in sub 20 minutes each all day.

But to get closer to these numbers, you first need to change your nozzle to a .8mm. A larger nozzle is the single largest print time reducing measure you can do.

A larger nozzle will make printing stacks harder though, and my recommendation is that you to print two at a time instead of stacking, it will give you better surface quality and a lower failure rate.

7f96c3d595af3d81c54e70c8912e59ce?default=blank&size=40exlink commented ago

Thank for you answer, i see but i learn people with a ender 3 pro can print them in 20 minute so i don't understand why i can't reduct the time :/

53a7146ca007df82a43ca61a99318703?default=blank&size=40Vakil01 commented ago

There are some stacker designs at: https://www.youmagine.com/designs/protective-visor-stacker The stacker designs do not save much time - maybe a minute or two. Their primary benefit is in using them for overnight print runs.

Your print time is about right - mine a are bit faster with my Prusa. However I reduced my print times significantly to about 50 minutes by switching from a .4mm nozzle to a ,6mm nozzle. There is a learning curve with this switch in settings for your slicer as well as nozzle temperatures. In addition one problem with the .6mm nozzle is supports are much more difficult to remove and this could be an issue with the stacker designs.

7f96c3d595af3d81c54e70c8912e59ce?default=blank&size=40exlink commented ago

Hello, I have an unmodified Ender 3 Pro and I would like to print these visors (Europe ISO838 model). Unfortunately my printing takes 1 hour 24 minutes and I would like to be able to print a lot of them... So I would like to know if someone could help me to improve the settings and make a stack version (I think possible by 20). I leave my discord: ExLiNK#1986 (possibility of remuneration)

A67d8506b6064cd33800cd0c5c87bb17?default=blank&size=40kraems17 added this to the COVID collection ago
04293ca264493f496ee2c7b83d7e8c4e?default=blank&size=40gregware added this to the Covid collection ago
Bb9faf215c3f5bb410c2ce9481b8c855?default=blank&size=40V K commented ago

Printed on: ender 5 plus

Feedback: Well done Erik. Fantastic job! Your work has been truly inspirational.

I would be very grateful for your advice: I am a newbie to 3d printing. I am using your recommended settings (nozzle size 0.4mm, layer height 0.25, line width 0.5mm etc) but one side of the inner brow consistently appears thin (see picture). It's as though the printer as gone over the surrounding area too much, and left a thin segment in between. Am I doing something wrong? how do I correct this?

P.S. not sure how to add the image to this comments section!

Eb4f78644a9d49d7fde37d53a6682ab8?default=blank&size=40Benjamin Mondon printed this ago
Carousel thumb img 20200501 123030
Printed on:
Geeetech A10
Result:
Perfect design, comfortable and lightweight, thank you !
Feedback:
I had issues with the visor for the European version 838 with the hole spaces. I found that 79mm space between holes and a space of 68mm beteween middle holes fits better and visor is better maintened.
Mini erik stickerErik Cederberg closed issue i need step file ago
F52d297d3a2df6068c0cbd43789885b2?default=blank&size=40himanshu syal created issue i need step file ago
57453665511235e72b03e819113133bc?default=blank&size=40Ovidiu Chinan commented ago

Can I print in ASA prusament the VisorFramePRUSACOMPATIBLEv1-solidfront-visorstack17pcs95mm.stl on a single extruder MK3S?

Bb73de797eb4e27b343d6702a59457d3?default=blank&size=40lfrancoi commented ago

Hi,

I am printing your face shields in France for healthcare employees. I would very much like to know if you have had any feedback from any healthcare service regarding the disinfection processes that may be used with these 3D printed shields, and the endurance of these shields to repeated sterilization. I am particularly interested in results with PLA as the printing material.

Thank you in advance !

Fafc5c83ea2c996799df582267f7cf9b?default=blank&size=40Schaef added this to the COVID-19 collection ago
Fafc5c83ea2c996799df582267f7cf9b?default=blank&size=40Schaef printed this ago
Carousel thumb img 2130
Printed on:
Creality Ender-3
Result:
Excellent! Perfect! Thank you!
Feedback:
To help us stay organized with our printing of these visors, we created the "Protective Visor Stacker." https://www.youmagine.com/designs/protective-visor-stacker Thanks Erik!
97e659b14ee80feb56c7aecacfc2a836?default=blank&size=40paul mccabe printed this ago
Carousel thumb rwj icu evan gross
Printed on:
Creality Ender-3
Result:
Ender3 and Tevo Tarantula Pro
Feedback:
Great work. Personally we have printed just over 1000 and delivered in Central and Northern NJ, USA. The group I'm part of is closing in on 10000. It's the perfect combination of functionality and speed. Thank you. Paul and Erica McCabe Jackson, New Jersey, USA https://www.facebook.com/groups/221580355872833
97e659b14ee80feb56c7aecacfc2a836?default=blank&size=40paul mccabe printed this ago
Carousel thumb rwj icu evan gross
Printed on:
Creality Ender-3
Result:
Ender3 and Tevo Tarantula Pro
Feedback:
Great work. Personally we have printed just over 1000 and delivered in Central and Northern NJ, USA. The group I'm part of is closing in on 10000. It's the perfect combination of functionality and speed. Thank you. Paul and Erica McCabe Jackson, New Jersey, USA https://www.facebook.com/groups/221580355872833
Bb73de797eb4e27b343d6702a59457d3?default=blank&size=40lfrancoi commented ago

If any of you is looking for stacked versions to print overnight or just print more with less human input, I successfully used these stacks:

https://retrolabs.com/3d-prints/3d-printed-face-shield-with-10-mil-pvc

I've made more than 40 of the x10 stacks so far (see my reports on printing them with a Wibox 2 or Dagoma DiscoEasy 200 just below), almost no issues, printing at the upper limit of my PLA temperature.I usually need to use a putty knife to separate them by applying force parallel to the separation layers to break it, but that is quite easy, and the surface is quite clean after separation. I found that the Gcode generated by Ultimaker Cura results in tougher separation layers as compared to the ones obtained with Gcode generated by the Dagoma version of Cura. I also found that the closed version of the visor is sturdier and stacks better than the open one.

Fd04103f8df32fa28595b23223628546?default=blank&size=40Skywalker1337s commented ago

I remixed the remix by @michaeljones1992 to support Swedish punch hole dimensions. So if you have a smaller printer such as the FlashForge Finder and want to support Swedish Health Care system, please check it out: https://www.youmagine.com/designs/protective-visor-by-3dverkstan-remix-for-smaller-printers-sweden

Bb73de797eb4e27b343d6702a59457d3?default=blank&size=40lfrancoi printed this ago
Carousel thumb img 20200422 102650
Printed on:
Dagoma DiscoEasy 200
Result:
Very good prints with stacks of 10 and eSun PLA+ filament. Temperature of 220°C, layers of 0.2mm, 33% infill, speed at 200%. Roughly 7h for a stack of 10. The pieces are separated using a trowel (see image) and a glove to avoid cuts. Each separated piece is strong, but the surface quality is slightly worse than with the Wibox 2.
Feedback:
(see my previous comment on the printing with a Witbox 2); Great job for the model !
Bb73de797eb4e27b343d6702a59457d3?default=blank&size=40lfrancoi printed this ago
Carousel thumb img 20200422 102620
Printed on:
Witbox
Result:
Perfect print with stacks of 10. Settings are: PLA from BQ, 220°C, 0.4mm layer height, 30% infill.The separated visors are strong and the surface quality is very good. Print time is around 7 hours for 10 stacked pieces. Also printed it almost equally well on a Dagoma DiscoEasy200. The combination of the two allows me to produce 40 to 60 pieces a day.
Feedback:
Maybe a version with a bigger frontend to accommodate people with long nose could be useful ! Nice job, the design is very compact, and does not require any elastic.
Dec03e82796a3c6fb53677b5099de168?default=blank&size=40Michael Hotker created issue Laminating sheets? ago
70daaab75ceee4649f0304080a071b1b?default=blank&size=40shyam54 created issue STP File required ( Europe_888 ) ago
Cc55cc7d15644b1134ca5fd3e4833e15?default=blank&size=40Runortyx created issue European 80mm Stack Template ago
19d0e692d8a026453518e8e576a095ce?default=blank&size=40Michael Ang created issue European 4-hole punch ago
Mini erik stickerErik Cederberg commented ago

@Jason Colman: If you are talking about the included stacks, they are clearly in a folder named "For dual extrusion printers", and have a separate file with modeled supports to be printed in a separate material. They will NOT work well if you try to print them on a single extrusion printer.

Single extrusion stacking requires you to match the separation to be a exact multiple of the layer height you are using and to tune your printer settings carefully. To generate such a STL, use the solid front STL and put it into the software LuBan, that is now including a free stacking tool where you can customize separation and easily generate stacks with as many frames you would like.

Read more here:

https://www.facebook.com/groups/1067858546711484/permalink/1491622321001769/

B9133ca8de0c21b8e1c7a8cd9ced95a4?default=blank&size=40Jason Colman commented ago

on the North american stacked model are you printing without supports or what? Mine came apart but needed alot of cleanup.

Mini erik stickerErik Cederberg commented ago

@Mohsen Mokhtabad Amrei: Yes, you can use it, no problem :-)

B5b781c7d202fec05ffe1ad67a13f64d?default=blank&size=40Jonas LaPointe printed this ago
Carousel thumb img 20200415 224227
Printed on:
Makerbot - MakerBot Replicator 2
Result:
Excellent! Healthcare workers and doctors are very happy with them here in Massachusetts, USA. The group I am collaborating with have delivered over 430 of the shields so far.
Feedback:
Great design. I tried many before settling on your design. It is very good and great that it does not require elastic as that is not available anywhere anymore.
B5b781c7d202fec05ffe1ad67a13f64d?default=blank&size=40Jonas LaPointe printed this ago
Carousel thumb img 20200415 224227
Printed on:
Makerbot - MakerBot Replicator 2
Result:
Excellent! Healthcare workers and doctors are very happy with them here in Massachusetts, USA. The group I am collaborating with have delivered over 430 of the shields so far.
Feedback:
Great design. I tried many before settling on your design. It is very good and great that it does not require elastic as that is not available anywhere anymore.
25e3f76ff4a4ec6adffc512e14c76670?default=blank&size=40Mohsen Mokhtabad Amrei commented ago

hello, thanks for the files. can I use the picture you have (the first image, no modification)?

2b760d5663fd8541cbb926b31bc5e328?default=blank&size=40captainburks added this to the Covid collection ago
Cf56fd8fa906d0c340ca452e4f94d06a?default=blank&size=40Juan Sandoval printed this ago
Carousel thumb visor
Printed on:
Creality Ender-3
Result:
Nice results!
Mini abe profile visorAlexander Berglund commented ago

I made a remix, for single extrusion stacking. Available here: https://www.youmagine.com/designs/protective-visor-by-3dverkstan-remix-abe-for-single-extruder-stacking

Only the 4 hole Swedish version at the moment. But .step is included.

8c94e016d0fb8fa7a4e43bab9ee23aff?default=blank&size=40Michael Wraight printed this ago
Carousel thumb 20200413 210037
Printed on:
Creality Ender-3
Result:
Excellent - we've printed 125 so far for local medical professionals. We've used 2 Creality Ender 3's, a Creality CR-10, a Taz 6 and a MakerBot Replicator 5th gen. Worked well on all printers. Design is great, solid, and comfortable.
Feedback:
Keep doing what you're doing - this design is awesome and functional!
0f8e4df3ee717795f2a69f92379703d1?default=blank&size=40emmart commented ago

Hello, thanks!

Will you be so nice to design a version for smaller printers (150mmx150mmx150mm)?.

Like this one here https://www.thingiverse.com/thing:4276934

It will be super useful.

Thanks

2de6c69225747745991984821c9968d1?default=blank&size=40meriu added this to the COVID collection ago
54b25ec5826486f9a8c7b8b572e9e6e7?default=blank&size=40HappyHermit3D added this to the COVID collection ago
Mini erik stickerErik Cederberg commented ago

@Mr.John: Jag rekommenderar att sikta på 220x220mm, då kan du printa två åt gången.

9f6f03ba6162b849c7672a64ff0ed482?default=blank&size=40Mr.John commented ago

Hej Erik, skall köpa en 3d skrivare för att hjälpa till, vilken rekommenderar du? vilka mått är det som gäller för plattan är det 160x210mm som gäller?

Ac5a16147f4f06ba4704038c83a275a7?default=blank&size=40djboyle added this to the Masks collection ago
0e85d85fae099cbb5da7bde55f487e29?default=blank&size=40Alexander Swensen added this to the Face Masks collection ago
9808c9c948077c3e6da4f5ae05d3b0e4?default=blank&size=40François Le Boulaire added this to the STOP-COVID collection ago
Ca8b052190d3e4a3451774bdfbf8e7d8?default=blank&size=40Vlad Satchouk commented ago

@ighdesigns I have made a fixed version that works with the north american template and a single hole punch. You can find it on my remix link here:

https://www.youmagine.com/designs/verkstan-face-shield-north-american-6-hole-fixed

And download the file with the ending "forSHP"

7bade22b8afbb5be68dd66e7f3c8803d?default=blank&size=40Christopher Wong added this to the Things collection ago
D0a49e1853a70beb36d4dc33c09e80ab?default=blank&size=40Gene Arnold commented ago

I just downloaded the full download but it will not unzip correctly on my Mac. The single versions will download and unzip. I need the NA 3 hole stacked version for a single extruder printer. Would like to print stacked version on my Ender 3. Can someone please help?

5f8e7a05cebef61b3a0dd5f1bd4fadde?default=blank&size=40irawans added this to the Need to Print collection ago
Mini head shotGarrett Lord commented ago

A modular Europe 4-Hole has been added, both in individual pieces and a complete set that fits in a 140mm x 140mm bed.

https://www.youmagine.com/designs/modular-protective-visor

Ee8424dc0938baf06b79f3458fbe3ec2?default=blank&size=40ighdesigns commented ago

I just use a single hole punch. Made one template and mark the holes on a

new sheet. I tried another 3D design, and they also said use a 3 hole punch

which didn't make any sense. I think they have some other kind of 3 hole

punch that I've never seen.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

@ErikCederberg, I know that, I have the file, I was asking @jenchris1

Mini erik stickerErik Cederberg commented ago

@redheadmaker: there is templates in the downloaded file.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Do you have the pdf with the template for the holes?

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

i do not know why is posted three times to add to my shame but i figured it out

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

ok im gonna say it i feel crazy, maybe im dumb , me and my husband have spent the last hour trying to figure out this three hole punch spacer thing is there a video somewhere?

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

ok im gonna say it i feel crazy, maybe im dumb , me and my husband have spent the last hour trying to figure out this three hole punch spacer thing is there a video somewhere?

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

ok im gonna say it i feel crazy, maybe im dumb , me and my husband have spent the last hour trying to figure out this three hole punch spacer thing is there a video somewhere?

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

@james baldwin I tried to use the cricut file it will not allow me to , it loads it into design space and then it wont let me click make it. is there anyway you can email me?

3fb718690dc65abc33778abe2a3e866c?default=blank&size=40Yannick# added this to the Masque collection ago
19c1017e41ea5b971e4cfa19be4cda54?default=blank&size=40Volunteer KWT added this to the Covid-19 collection ago
77e0c921c4ab9863f99605d037e8d714?default=blank&size=40aveblein added this to the face shields collection ago
43b47c2f807dfbd6adf4349238fa3571?default=blank&size=40carlosleon added this to the Visors collection ago
Ca8b052190d3e4a3451774bdfbf8e7d8?default=blank&size=40Vlad Satchouk commented ago

Hello, I have recreated the solidworks file and fixed the north american 6 hole punch spacing

https://www.youmagine.com/designs/verkstan-face-shield-north-american-6-hole-fixed

F991436304ea908d891a748f53e0a66f?default=blank&size=40James Baldwin commented ago

@jenchris1 I uploaded a file to Design Space if you want to check it out. I was having an issue with hole alignment as well so I edited the DXF and made my own. This is for an 8.5x11 sheet. https://design.cricut.com/landing/project-detail/5e8aa11ade49110b747b73dd

64a20635116ad52c264dd2913a82597d?default=blank&size=40Jenchris1 commented ago

Hi there, I am currently printing the 3d north america band six hole, i am also trying to cut via svg using a die cut machine as i do not have a laser cut machine, I have a cricut machine which i have seen others use for other ppe projects. I am struggling with it cutting off the corners just a bit to much and there for cutting about 1/4 or so of an inch off of the template. I am thinking of enlarging the template a smidge to fix this , however worry it will effect the hole size and cause issues. Has anyone else used a cricut machine and had issues or figured out a fix for this?

Mini erik stickerErik Cederberg commented ago

Hi @mehdi: The file "frameopentopstack_x10" is not a file i have released. Please ask that question to the creator of the file.

19de0341382c9cad20263aa11cbc89cb?default=blank&size=40JayArgh commented ago

@Garrett Lord. Thanks! I'll give that one a try.

475070b5a675466af96f09f3a075e92a?default=blank&size=40mehdi commented ago

Hello,

I printed the file frameopentopstack_x10 and I can't separate them.

nuzzle 0.8

240

bed 70

and I followed the configuration in the file.

Do you have a solution?

thank you

Mini head shotGarrett Lord commented ago

@JayArgh I have a modular version of the North America 3-Hole here: https://www.youmagine.com/designs/modular-protective-visor

I have the piece as separate files or as a combined file (which will fit your 15cmx15cm bed)

They snap together once done, and should not require any fasteners or glue.

19de0341382c9cad20263aa11cbc89cb?default=blank&size=40JayArgh commented ago

I am looking to print the North America 3 or 6 hole model, however, my print bed is only 15x15cm (Qiditech X-one 2) and is thus too small for the all-in-one design. Is there a way to break down the design into three pieces that can be printed on the diagonal? Thinking out loud: print the legs separately and screw and/or glue them to the forehead bridge?

Mini f1c7665a e432 4435 a3e9 956e44e9d21bDam's / ATELIER + commented ago

Thanks for the great model.

After showing different models and prototypes to my local hospital and getting their feedback, I remixed your model with the Prusa RC2/3, mainly to add space for mask and glasses.

They also liked it to hold well without rubber bands for disinfection.

For those interested: https://www.youmagine.com/designs/face-shield-post-tenebras-lux

Mini xbox live creeper head minecraft 360gridhawk added this to the covid-19 collection ago
Mini erik stickerErik Cederberg commented ago

@Zach Smith: You need about a 210x210mm print bed to be able to fit two at a time on the bed.

If you would be OK with only one, the bare minimum is approx 160x185mm

Mini erik stickerErik Cederberg commented ago

@zlatko, skicka mig ett mail på faceshield@3dverkstan.se så tittar jag på det.

2dc8cbe7b0de0a4378fdc74133f93e35?default=blank&size=40zlatko commented ago

Hej Erik, nu har vi kört 70 st. skyddsvisirer av modellen VisorframeSWEDEN_v11 och tänker köra upp mot 400. Dock har jag ett önskemål om modelländring. Skulle ni kunna ta bort gliporna då det fastan pulver för oss och är svårt att rengöra. Vi upplever att skyddsvisirerna blir elastiska även utan dessa.

Stay Safe :)

18d3d0a260a96729dcc43fc9a445bfc6?default=blank&size=40christianb2 added this to the Face Shields collection ago
29fe0df1b5ef7ed7bedf8fe383c56c6a?default=blank&size=40Zach Smith commented ago

I am about to buy a 3D printer to make these. What size printer do I need?

Cf9d94e5eb9a91a56c8e2a9b4d7cae14?default=blank&size=40Yves Lenhard (YL) commented ago

Using Raise3D with 0.8 nozzle. Fitting 3 pcs on buildplate and it takes 64min for the whole 3 pcs print.

Mini erik stickerErik Cederberg commented ago

Yves Lenhard (YL): This issue should be fixed now if you download the files again.

0aa2f50ef37d748e51e6c7b4b0b09496?default=blank&size=40Thomas Lum commented ago

I have had good luck with using my UM3 with a .8mm nozzle 1 for the PLA and a .4mm nozzle 2 with breakaway support material. I use a .3mm layer height and the frames separate very cleanly. You have to use the dual extrusion files and I modified them to just print 10 frames and 9 support layers. Prints take about 7.5 hours.

D501403e19bf98c1ad1c610bdfaecc07?default=blank&size=40gcrocker commented ago

Our FIRST Tech Challenge robotics team generated a resin-cast mold approach based on this using the North American frame: https://www.thingiverse.com/thing:4252623

You 3d print a "mold mold", mix silicone, put it in the "mold mold", now you have a silicone mold. Then you mix resin and pour it into the mold. Wait 15 minutes, repeat. A warm oven is needed for resin curing. This enables folks who DON'T have a 3d printer to make face shield frames.

Mini erik stickerErik Cederberg commented ago

@Alexander Kjeldaas if you follow the directions on http://faceshield.nu, it will guide you how to make Cura slice like that, similar setting should be possible for PrusaSlicer as well.

Adb23e070376bc90962b90eec7b8a8ca?default=blank&size=40Alexander Kjeldaas commented ago

@Dizzy did you find gcodes for printing two in less than an hour on MK3S?

Adb23e070376bc90962b90eec7b8a8ca?default=blank&size=40Alexander Kjeldaas commented ago

Which slicer will do the layout so that there are long strokes along the edges? Prusa Slicer will fill everything with a constant direction, and I guess that will cause a lot more accelleration and slower prints? Who can share gcodes for a good slice for this?

48eb1fe00b7c0b31c6c9eb0734002d55?default=blank&size=40mb chang added this to the Tools collection ago
87e794ae0940a2924500793e79bd1575?default=blank&size=40gotrobot? commented ago

Our robotics team is successfully printing stacks of 10... multiple locations. Reached out to Erik. Waiting to hear back. We would be happy to share the g-code. (Hi Christian! Sass!)

Adb23e070376bc90962b90eec7b8a8ca?default=blank&size=40Alexander Kjeldaas commented ago

I tried stacking with 0.2mm spacing using LuBan, but that doesn't give proper separation between the items. Also when printing a single item, I don't think the bottom layer is think enough.

Maybe someone more experienced can give some guidance on how to make the bottom layer thicker, and what spacing is best in LuBan? This is one of my first prints.

Otherwise this prints great on a MK3S using PETG.

0aa2f50ef37d748e51e6c7b4b0b09496?default=blank&size=40Thomas Lum commented ago

The North American 17 piece support stack isn't correct, it is the same as the visor stack. Can someone rue-load just that stl file?

Mini gb fotoGiovanni Becchina added this to the Covid-19 collection ago
Adb23e070376bc90962b90eec7b8a8ca?default=blank&size=40Alexander Kjeldaas commented ago

I understand that Prusa Slicer needs some vertical bars going through the stacked structure in order to not complain about errors. It won't slice anything hanging in the air. Would it be possible to add this to the (Swedish) models?

4ee8af15cbca02d689e5c3e0b0f32dfa?default=blank&size=40Christian Sass (sastian) printed this ago
Carousel thumb img 1739
Printed on:
Creality Ender-3
Result:
Great results!!!
Feedback:
Our entire robotics team is working on getting these made for local front line personnel in this crisis. The team members are working hard at refining the code for stacked versions and getting pretty good results... currently testing a 20 piece stack
Ee8424dc0938baf06b79f3458fbe3ec2?default=blank&size=40ighdesigns commented ago

Hi, did you add a piece for attaching the foam to the band?

Ec25d30f53121cc9db541b2c397424bf?default=blank&size=40Joe Caroon commented ago

I'm having troubles finding the stl of the yellow banded face shield shown above that looks like it has more clearance from the face. Any chance some one can point me to the link? Our local hospital is telling me that their face is touching the shield.

B73bc216d37e01fa260575440de49e7b?default=blank&size=40Gerhard Wilkens commented ago

Can i close the loop at the end somehow? every medical worker whcich tried this and has long hair was tangled in this face shield and it was hard to remove from face because the hair was behind the loop hook

Hey, i have two simple questions. Can i use this file VisorframeEUROPEISO838v4-1mm_front with my ender - 3 (no dual extrusion) ? Should i print the stacked version with supports? Will i have any problem with the gap between each visor frame? Really thank you for the design.. I am trying to print non stop for my local hospital !

Cf9d94e5eb9a91a56c8e2a9b4d7cae14?default=blank&size=40Yves Lenhard (YL) commented ago

@Erik Cerberg. Thanks. I got it. Please fix the

VisorFrameNORTHAMERICAletter6-holev5-solidfront-supportstack17pcs95mm

model. It is not! the support model. Thats why it confused me. Both support and visor model are the same in the 17pcs version

Mini erik stickerErik Cederberg commented ago

Everyone requesting stacked versions for single extrusion: LuBan (free software for smaller models) is now including a stacking tool where you can customize separation etc and easily generate your own stacks from the STL files. I recommend that you use the solid brow versions for stacking.

Read more here:

https://www.facebook.com/groups/1067858546711484/permalink/1491622321001769/

Mini erik stickerErik Cederberg commented ago

barker227: Sorry, i have not used the Stratasys slicers a lot, so i can't help you here.

Cfe57a9d18f36d8530973add7d30d912?default=blank&size=40Dancarey94 added this to the Face Shields collection ago
Mini erik stickerErik Cederberg commented ago

@Yves Lenhard (YL): Use 0.4 AA and Ultimaker Breakaway as a Support material. For the model you can use a 0.8mm AA.

Turn off support altogheter (we're using a custom model as support)

Choose a visor stack file and open it in Cura.

Open the corresponding support stack file.

Right click -> Merge.

Select the support (Ctrl+click) and choose that stack to print with extruder 2.

Turn off prime tower.

66fa90b3ddce29622996b7b0a137b11b?default=blank&size=40barker227 commented ago

WritePreview

First off, thank you for sharing this file - we have been printing it for several days and it has been a huge help to local healthcare workers. I have been printing the 17 high file on my Dimension 1200es printer, but even though it is a very simple file, there seems to be an excess of support material around it. I have seen the same file printed on social media where the support material only seems to be between the actual models. Does anyone have any thought on if this is an issue that can be fixed?

Thanks!

7553d8e9aa02a36c569cd735cbdfa1ff?default=blank&size=40KrisG commented ago

I printed 3 EU versions on a Ultimaker 3 with a 0.4mm nozzle (I think, printer is not mine).

They are usable but not really solid.

Lines are almost coming loose, not really, but it could be better.

I'm pretty new to 3D printing, could anyone tell me what settings to change to solve this for future prints ?

Cf9d94e5eb9a91a56c8e2a9b4d7cae14?default=blank&size=40Yves Lenhard (YL) commented ago

How to print stacked stl with Dual Extruder? Use 0.4 nozzle for supports? Support material? Support distance to parts?

Can you share your stacked settings?

Mini head shotGarrett Lord commented ago

Just to keep everyone updated on the modular design, full sets of the North American 3-hole and Sweden 6-hole have been uploaded. They fit on a 140x140 bed with the build being 130x130 to allow for a raft.

5201122c1ae7e963dd85712ede3c1b54?default=blank&size=40lilyrmarie commented ago

@Erik Cederberg - thank you so much! That did the trick - going to start printing a whole bunch of these now. Thank you, thank you, thank you!

Cfe57a9d18f36d8530973add7d30d912?default=blank&size=40Dancarey94 commented ago

Hello Erik! Love the design and I'm gearing up to print these myself. I was wondering if you could release an updated version that is stackable? It would add tremendous efficiency to an already amazing design. I think that would be a huge help to home-printers everywhere trying to do their part. Thanks again for your incredible work and I hope to see a stackable design soon!

Daniel Carey

Mini erik stickerErik Cederberg commented ago

@lilyrmarie Just open Cura, go to preferences in the top menu and click on "Configure Cura". In the window that comes up, uncheck the box "Ensure models are kept apart" and you will be able to put them as you please.

5201122c1ae7e963dd85712ede3c1b54?default=blank&size=40lilyrmarie commented ago

Would someone be able to share a file of the North American 6 hole punch (the one that is solid in the front) where there are 2 shields on the print bed? It looks like there is enough space to print 2 if you put the "ear piece" part of one almost inside the other. I am using Lulzbot Cura software and am pretty much still a novice so when I tried to put 2 on the build plate and orientate them in that way, it wouldn't let me.

Thanks for any assistance you could provide.

786ecc02e8b0a61e862c6bcf2fa097c9?default=blank&size=40Ugly1 added this to the PPE collection ago
90dd5f44c4e69192ae2dc953312764ec?default=blank&size=40Dizzy commented ago

Hej friends,

Är det någon som har en prusakompatibel fil, som tar 2 på under en timme, för 0,4 nozzle? Jag hittade en som heter prusaverkstan0.35mmPLAMK2S55m. MEN den har ju plupparna för hålen på fel ställen. Någon som vet?

Mini erik stickerErik Cederberg commented ago

Du kan gott köra den solida, de tunnare finns egentligen bara för att spara utskriftstid i FDM-skrivare.

2dc8cbe7b0de0a4378fdc74133f93e35?default=blank&size=40zlatko commented ago

Tack igen Erik och en sista fråga, vilken av de tre modellerna ska jag ta, solida, 1mm eller bara version 11 ?

Mini erik stickerErik Cederberg commented ago

@zlatko: Generellt avråder jag från flerdelade modeller eftersom du dels får ett monteringssteg och dels får håligheter som blir svåra att desinficera. Jag har ärligt sagt inte sett modellen du refererar till från Garret Lord, så jag har svårt att avgöra.

Sen skulle det säkert gå att optimera modellen ännu bättre för pulverbäddstekniker, fokus för mig har varit att optimera för FDM.

Mini erik stickerErik Cederberg commented ago

@Christophe C: I have not had very good results with single extrusion stacking, and this is why you are not finding a official single extrusion stacked model amongst my files above. It can absolutely be done, but it requires careful tuning of both printer, file and settings.

And i am doing as best as i can to keep up with all the comments, emails and requests, i spend quite a few hours per day with this right now. :-)

2dc8cbe7b0de0a4378fdc74133f93e35?default=blank&size=40zlatko commented ago

OK, tack Erik. Nästa fråga, jag tänker köra en pack med med visirer i vår lasersintringsmaskin (EOS Formiga P110) och är mellan valet och kvalet om jag ska packa med modulära modelen från Garret Lord och få 105 visirer per körning eller din modell och köra bara 60 ? Några förslag/tips ?

Bra initiativ btw :)

8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=40Christophe C. commented ago

by the way I have not seen a lot of such message (and did not yet do myself) :

Thanks a lot Erik Cederberg ! I see a big involvement in the modeling as well as a lot of time (and patience) in answering messages. So thanks a lot for that !

8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=40Christophe C. commented ago

Hei ! how is your luck on stacked version from retrolab ? ours are sticking to one another and very hard to separate (for example for the european version with 5 stacked prints).

Any advise on how to print stacked and still have easy separation ? (single extruder)

Mini erik stickerErik Cederberg commented ago

@Zlatko: Tryck på "Download" uppe till höger, packa upp och öppna zip-filen "Sweden", så finns det i mappen för STL-filer.

2dc8cbe7b0de0a4378fdc74133f93e35?default=blank&size=40zlatko commented ago

Hej Erik, var hittar jag STL-en till detaljen ?

Mini erik stickerErik Cederberg commented ago

@Jason Cheng

The stacked versions are made for dual extrusion printers and you need to combine the support and the visor stacks to get a full stack to print. I have no experience myself with dual extrusion in prusa slicer myself, so i have a hard time knowing a solution to your problem.

Mini erik stickerErik Cederberg commented ago

@Jason Cheng: the difference is that the thin part in the brow has its thickness increased to 1mm, it is if you have a hard time getting that part solid.

687af7b2479b807eea3fdcba3df8de5d?default=blank&size=40Jason Cheng commented ago

Any advice on how to get PrusaSlicer to slice the stacked versions? I'm getting:

Empty layers detected, the output would not be printable.

Object name: VisorFrameNORTHAMERICAletter6-holev5-solidfront-supportstack17pcs95mm.stl

Print z: 5.900000

This is usually caused by negligibly small extrusions or by a faulty model. Try to repair the model or change its orientation on the bed.

I'm trying to help a local non profit print these, but can not get the stacked versions STLs to work.

Thanks!

687af7b2479b807eea3fdcba3df8de5d?default=blank&size=40Jason Cheng commented ago

Any advice on how to get PrusaSlicer to slice the stacked versions? I'm getting:

Empty layers detected, the output would not be printable.

Object name: VisorFrameNORTHAMERICAletter6-holev5-solidfront-supportstack17pcs95mm.stl

Print z: 5.900000

This is usually caused by negligibly small extrusions or by a faulty model. Try to repair the model or change its orientation on the bed.

I'm trying to help a local non profit print these, but can not get the stacked versions STLs to work.

Thanks!

687af7b2479b807eea3fdcba3df8de5d?default=blank&size=40Jason Cheng commented ago

What's the difference between:

VisorFrameNORTHAMERICAletter6-holev5-1mm_front.stl

and

VisorFrameNORTHAMERICAletter6-holev5.stl

?

F991436304ea908d891a748f53e0a66f?default=blank&size=40James Baldwin commented ago

Thanks for all you are doing! I have started printing the NA 6 hole version. I used some of the existing dxf files and imported them into Cricut Design Space. I have a Cricut cutting machine, and I wanted to be able to use it to cut out the shield portion. For anyone that wants to use it, you can find it here.

https://design.cricut.com/landing/project-detail/5e8aa11ade49110b747b73dd

I use the transparency setting on the Cricut and it cuts it out of an 8.5x11 piece perfectly. I resized the holes from the original files just a bit smaller, so they are very secure on the frame.

Mini erik stickerErik Cederberg commented ago

@Mdeleppe: A small radii added to the arm connecting to the temple, since the sharp point was causing some slicers to do sub-optimal pathing.

Fc015eccdfe2621c3f06062719958ed9?default=blank&size=40ConorMac commented ago

Hi Guys. I need your help. I have an old Makerbot Replicator 2 and i'd like to print this design out. The European 888 and 838 stl files dont fit into the build plate. Are there modified stl files that will fit a makerbot replicator 2 with European hole punches?

Thanks for the help.

8f13834bbcc9fa77b0244f2949dcc1bd?default=blank&size=40Sbfoxy commented ago

Also I am using the Ender 3 Pro printer with Cura and what is a good setting for speed. I am relatively new to all this. They are coming out good, it takes 3 hours. I am trying to increase the size of the frame to 105% to see if it helps with the shield holes. Also what are you using for the shield. I've gotten some transparencies but they are thin....

8f13834bbcc9fa77b0244f2949dcc1bd?default=blank&size=40Sbfoxy commented ago

Also I am using the Ender 3 Pro printer with Cura and what is a good setting for speed. I am relatively new to all this. They are coming out good, it takes 3 hours. I am trying to increase the size of the frame to 105% to see if it helps with the shield holes. Also what are you using for the shield. I've gotten some transparencies but they are thin....

8f13834bbcc9fa77b0244f2949dcc1bd?default=blank&size=40Sbfoxy commented ago

I am having a problems with The North American frame 6 post with the arrangement for the 3 hole punch, they are off. We have modified it manually but still a little off on the side holes next to the last. Also the holes seem a little big for the visor?

Please help.

Mini head shotGarrett Lord commented ago

I've added a modular Sweden 6 hole version at this link:

https://www.youmagine.com/designs/modular-protective-visor

92fd550fb19f0fea06493a9318fa4391?default=blank&size=40James Basa printed this ago
Carousel thumb img 0134
Printed on:
Creality CR-10S
Result:
Really good so far! Thanks for all your work Erik and Team. I started with North America 6 hole and then to 3 holes. I went back to 6 holes after some feedback and my own impressions on how the shield fits and won't shift side to side when wearing it. My daughter works in a care facility and they are not on a list as of yet to get income masks and Sheilds, so this have been tremendous. I commend the whole 3d community for pulling together on this.
765d9257cbc3c6bc41db292e5f07454d?default=blank&size=40Mdeleppe commented ago

Great design. We've so far produced 3k units. Quick question : whats the difference between euro-iso v3 and v4? We need signoff by our local healthcare org for any change in design but couldnt find a change log. Thanks.

39ddbf503cd663820cc6e85246b79a75?default=blank&size=40BeardyMcWhisky printed this ago
Carousel thumb 91484256 10163688313845085 5628320011639586816 o
Printed on:
Creality Ender-3
Result:
Awesome.
Feedback:
Would br great to have a stacked version.
1c44ef3625a5a09b957dd10fdbb302f2?default=blank&size=40Leigh Sanger commented ago

Erik Cederberg: Would you mind sharing the .dxf?

Mini erik stickerErik Cederberg commented ago

Leigh Sanger: I could very easily round it, but it messes a lot with the slicer algorithms when you are printing with large nozzles / layer heights, and makes the prints way less efficient.

1c44ef3625a5a09b957dd10fdbb302f2?default=blank&size=40Leigh Sanger commented ago

I haven't been able to find the Visor Frame North America Letter 6 Hole V5 1mm Front.dsf except of the Mylar template. Anyone know where I might be able to find it?

1c44ef3625a5a09b957dd10fdbb302f2?default=blank&size=40Leigh Sanger commented ago

It makes sense that the edges be rounded to avoid friction to the face. Many images of health care workers with contact abrasions are popping up all over. I could modify the file if others feel it would be beneficial. Your thoughts?

D7e94cd871a1b27df75668d4b808acea?default=blank&size=40Don Wood commented ago

Thanks much for that! I just took 5 of the shields to a Masonic Nursing

Home in the area and they loved them! They said that they would be helpful

in many ways, not just COVID-19.

Thanks again for putting this design together!

Don

Mini erik stickerErik Cederberg commented ago

@Don Wood: I did, Erik Cederberg / 3DVerkstan, then i got some help from some US friends with verifying the fit.

Mini erik stickerErik Cederberg commented ago

@Don Wood: I did, Erik Cederberg / 3DVerkstan, then i got some help from some US friends with verifying the fit.

D7e94cd871a1b27df75668d4b808acea?default=blank&size=40Don Wood commented ago

Who designed the US 6 hole version so that I can give them credit?

Cf5fe4d66771f9b2c21e28faed083724?default=blank&size=40jedikangaroo printed this ago
Carousel thumb img 4525
Printed on:
Cocoon Touch
Result:
Printed 12+ successfully. Will be donated to local hospital.
Feedback:
Thanks.
Cf5fe4d66771f9b2c21e28faed083724?default=blank&size=40jedikangaroo added this to the Corona collection ago
Da5d2eefc6053b4f33f25768b5390746?default=blank&size=40Jimmy Sapède commented ago

cuts in the side plots for euro iso838 should be little deeper also

Da5d2eefc6053b4f33f25768b5390746?default=blank&size=40Jimmy Sapède commented ago

cuts in the side plots for euro iso838 should be little deeper also

Da5d2eefc6053b4f33f25768b5390746?default=blank&size=40Jimmy Sapède commented ago

European ISO839 holes are to be modified

when punching with A6, the holes on sides are too much in coincidence with center of the plot hence the holding of the film is not so good.

please move plots a little towards the end of the branch (like 2-3mm) to ensure better holding. Ceter plots are OK

plots should be a little bigger also

Mini invasion of the body snatchers 1978Grant Clark printed this ago
Carousel thumb 20200403 094023
Printed on:
Original Prusa i3 MK3S
Result:
Excellent design and function.....And one very happy emergency room in Oregon City, Oregon, U.S.A.
Mini head shotGarrett Lord commented ago

Hi all,

I haven't see anything posted for a smaller, modular version, for those with micro printers. So I quickly put together a design that works with a printer as small as 4"x4" (100mmx100mm).

It's on this website, link below:

https://www.youmagine.com/designs/modular-protective-visor

6fd26173aacc0ab71f3e9dd45547330f?default=blank&size=40andy_spoo commented ago

Anyone know of a particular NHS trust or hospital in the UK that is happy to receive/use THIS VERSION? Where can we send them to?

The Prusa version takes forever to print, but they seem more organised with the 3DCrowdUK website https://www.3dcrowd.uk/

I'm happy to print these, but not if I don't know who to send them to :-)

Andy

86552d011ab737ea3990854a84813265?default=blank&size=40EscapeTechno commented ago

S'il vous plaît, j'ai besoin d'aide pour le zip "Europe Iso838 V4 Stacked For Dual Extrusion"

Comment utiliser les 2 fichiers pour les 17 pièces dans cura ?

J'ai essayé de mettre les coordonnées x et y à 0 pour les deux fichiers et ensuite 5 en z pour le support. Mais j'ai peur que les pièces ne se détachent pas !

Merci

760dd17db2cb71056dd1cb1be8027fa2?default=blank&size=40G Swift added this to the visors collection ago
Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

The retrolabs version is a little further away from the face. It is very nice - just used the closedtop version, not the opentop. https://retrolabs.com/3d-prints/3d-printed-face-shield-with-10-mil-pvc

Mini erik stickerErik Cederberg commented ago

@Christophe C: I am working on a rework that will extend the front about 15mm in front or so, but just elongating it 30mm will not be a workable option, this would limit the number of printers that could use the design by a lot, since it would be over 210mm long. It is already close to the maximum possible length to be able to fit two nested visors on the buildplate of many popular printers like Ultimaker 2/3, Prusa MK2/3, Ender-3 etc.

6025c27dddcafc972e78a59d5bd8cd7f?default=blank&size=40George Benjamin-Schonberger added this to the Masks collection ago
8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=40Christophe C. commented ago

Hei,

Is there a version where the face shield is a bit further away from the face.

Depending on the shape of the face, this one can be too close, touch the nose and fog up quite quickly. Putting the transparent sheet 3cm further in front would help a lot and probably be a lot more confortable. (probably the 2 branches going on eather side of the head will need to be extended equaly).

Af5ffb675a5b8a8b23f40122cf2ea3e5?default=blank&size=40lizrackster commented ago

UNSUBSCRIBE PLEASE

069d544c23ecb85f0131d5a68e9cf60d?default=blank&size=40Jeffrey Hen commented ago

This is really cool, I want to help but don't have a 3D printer, so I thought I would try to improve it. I don't know if anyone else has done this but I added a little bit to the top of the first attachment point.

https://www.youmagine.com/designs/remix-of-protective-visor-by-3dverkstan

069d544c23ecb85f0131d5a68e9cf60d?default=blank&size=40Jeffrey Hen commented ago

This is really cool, I want to help but don't have a 3D printer, so I thought I would try to improve it. I don't know if anyone else has done this but I added a little bit to the top of the first attachment point.

https://www.youmagine.com/designs/remix-of-protective-visor-by-3dverkstan

035fcce52bc12b822b03a0b6a310c105?default=blank&size=40Orlando C added this to the COVID19 collection ago
Mini erik stickerErik Cederberg commented ago

@Dan Rollo: Looks great! Great project you got going there!

@RabidScallion: Thanks, it is much appreciated!

@johanna jehring: email me at faceshield@3dverkstan.se about it.

@3D_Cupcake: it would need some modification to make it work well on top of the chamfer. Also, single extrusion stacking does have quite a few problems with it. Single extrusion stacking is very sensitive to settings and often leave rough surfaces that are sub-optimal and hard to clean.

Mini logogbClaymore printed this ago
Carousel thumb img 20200402 213547
Printed on:
Original Prusa i3 MK3S
Result:
Easy to print, low volume of plastic used and the last but not the least, this design don't need a single rubber band.
Mini rabidscallion facing right 800x800RabidScallion commented ago

Erik!!! I agree. You’re awesome! Credit all the way. Efforts goingTo in CT

and NH (USA)

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Prusa slicer won't slice the Retrolabs stacked version. It says a empty layers detected and it is unprintable. I was able to print the separation test ok.

Fcfa7e79d0688193f88cc730504429c5?default=blank&size=40Dan Rollo commented ago

Erik, Just a quick note to say Thanks for sharing your design. I'm using it to print Face Shields for nurses in Central NJ. I've tried to be sure to give proper credit on the site where I'm sharing the information: https://github.com/bha-github-organization/trip-d-print#3d-printed-face-shields. Please let me know if I should change anything in that regard. - Dan

409ad55a4014aadd93ffca3a0114cf4c?default=blank&size=40johanna jehring commented ago

Hey, Do you happen to have a 2D file of this so it can be laser cut

4de02943e5162db7351bd85cdbbd230b?default=blank&size=40Per Åstrand printed this ago
Carousel thumb 110 visir
Printed on:
TRONXY
Result:
Great
D2568bc373e0b09ab2984054a4b3c811?default=blank&size=403D_Cupcake commented ago

Thanks for awesome job Erik and great job! For the next version: Would it be possible to increase the chamfer angle on the sides so it would be possible to stack these on top of eachother or will it become problematic then to attach the visor in the punched holes? Thanks!

918aabb05e77cfa8e40d2a76a5168326?default=blank&size=40Travis Hardiman printed this ago
Carousel thumb faceshield 3x
Printed on:
Creality CR-10S
Result:
I have it printing three at a time now. I have them arranged diagonally, with the two outer frames staggered. I disabled the skirt in cura and that gave me a bit more room to use. I also had to rearrange the binder clips holding the bed on.
Feedback:
👍
Mini erik stickerErik Cederberg commented ago

@DennyUofT: I am not providing full CAD files publicly, multiple people already have tried to claim this design as their own, and a lot of people remix without providing attribution and does not respect the license in other ways, not gonna help those people out by providing them with source files.

People with a good reason to get CAD files will get them if they email faceshield@3dverkstan.se with the reason and agree to not to spread it further.

104e2230cebffd0390978fcc8ac36404?default=blank&size=40DennyUofT commented ago

I see others have requested - is CAD file (.stp or other) available for modifications? Some local heath care workers have requested some tweaks.


Thanks.

880e15aa7643c53a520a09c9dc91bb5b?default=blank&size=40gguinchard added this to the covid19 collection ago
83afbe90968cbb23d8ee7dd2072ad8d6?default=blank&size=40Denis Rush commented ago

I also have a CR10 S5, how can i get the most out of the printer and run as many as possible.

Suggestions please

Denis

98bb942c64b57079c4764de3fb69f6fc?default=blank&size=40James Robertson commented ago

Thanks for this great file!

I am currently printing these in the UK, using my schools Dremel 3D45. One person below had a question about fitting these to the smaller print bed. Here are the scale settings that I used to get it to fit perfectly with a standard 4 hole punch:

Scale:

X - 102.42% (Length needed increasing to make up for width reduction)

Y - 98.33% (Width needed reducing)

Z - 100% (Height)

I hope this helps and thank you again!

92fd550fb19f0fea06493a9318fa4391?default=blank&size=40James Basa printed this ago
Carousel thumb img 0103
Printed on:
Creality CR-10S
Result:
Great. Thanks so much for your design. My daughter works in a senior care facility and this has been a tremendous gift for them to have.
Feedback:
If there was one item, it would be to make the space between the forehead and front a little wider.
Mini erik stickerErik Cederberg commented ago

I have added solid fron versions of all versions for all you guys that wants to make stacks.

I have also added pre-stacked versions for dual extrusion printing.

7922c048ce84af4d163c848d5dc6c6da?default=blank&size=40oroussel commented ago

@Erik Cederberg : Thanks a lot for the feedback about the "open cap", I had no idea of that. So we can use the stacked "closed cap" version of retrolabs ? (which looks like as a stack of your EU model right ?)

Mini erik stickerErik Cederberg commented ago

The Open Cap version at retrolabs does compromise the safety of the PPE, and this is NOT recommended. This kind of change shows a lack of understanding of why it exists.

7922c048ce84af4d163c848d5dc6c6da?default=blank&size=40oroussel commented ago

I think my last comment was not properly sent or maybe deleted.

For stacked versions of this model (North America and Europe versions), check this page:

https://retrolabs.com/3d-prints/3d-printed-face-shield-with-10-mil-pvc

7922c048ce84af4d163c848d5dc6c6da?default=blank&size=40oroussel commented ago

For stacked versions, I found this page where stacked versions are available for North America and Europe versions:

https://retrolabs.com/3d-prints/3d-printed-face-shield-with-10-mil-pvc

There are STL for stacks of 3, 5, 10 and 30 I think.

There is a variant for "open cap" (no fill in the cap) and "closed cap". I've tested the stack for "open cap" (which is faster to print) and everything was fine, pieces can be splitted easily.

D0b5f3086aecf9ce8843ebfe1ed7cc78?default=blank&size=40gmorain printed this ago
Carousel thumb img 2481
Printed on:
Zortax - Zortrax M200 3D-printer
Result:
Very good
8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=40Christophe C. commented ago

pff ... I just see there is a bunch of other comments asking for stacked versions.

If there is already a stl file of a stacked configuration, could you please advise which version ?

8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=40Christophe C. commented ago

Hei ! getting some inspiration from prusaprinter (https://www.prusaprinters.org/prints/27267), it would be really good to have stacked prints and be able to leave the printer running for 5 or 10 hours (overnight for example). I guess reducing top and bottom surface could help with detaching the visors and leave a decently smooth surface.

Limiting factor would be print time (no more than an overnight print) and filament quantity (usual spools are 750g or 1kg).

Please reply if you like the idea.

9649bdcc4ffd56721264223f3c8950d0?default=blank&size=40Santiago Zambrana commented ago

This is great work, I've been printing for almost 5 days and in Nicaragua, the people feel so happy with this face shield.

Can someone modify this for kids? a friend worried about their kids asked me and I'm not very good at designing

Ea2180b25391de5ca7f4a024cdce1cc4?default=blank&size=40DABlaylock commented ago

This is a great design using transparency sheets from office supply stores I have already made and gave away over 100 in just a few days. I have a CR10 S5 and can print 8 at a time easily printing 20 a day

Thank you Erik!!!!!!

918aabb05e77cfa8e40d2a76a5168326?default=blank&size=40Travis Hardiman commented ago

@Nussss you were able to fit 3 on the bed at one time? Can you share your 3mf or stl files? Or just an image of how they're oriented.

747f18493202ee85b292ce3665b65f1b?default=blank&size=40Nussss added this to the Covid collection ago
Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

I am using overhead transparencies and these work very well. You can find various ones on amazon. Try to find as thick as you can.

9581cd8da758be70c77d099e0e83b616?default=blank&size=40Rob commented ago

Has anyone found a good source for transparent plastic sheets? I purchased these however after trying it on it seriously hinders your vision. https://www.amazon.com/gp/product/B01GQREXO4/ref=ppxyodtbasintitleo00_s00?ie=UTF8&psc=1

747f18493202ee85b292ce3665b65f1b?default=blank&size=40Nussss printed this ago
Carousel thumb img 20200401 160822
Printed on:
Creality CR-10
Result:
Perfect, I can print 3 at a time.
B63b16b3e71f936b4bbc7cb0651c2964?default=blank&size=40r.f.conroy commented ago

Hey Erik,

would it be possible to share an IGES or STEP file format of this design so I could make some minor modifications?

I've got a series of printers, and about to kick off a large initiative with several different printing locations, so I would like to track quality control by adding material and fabrication location markings.

Thanks!

Af5ffb675a5b8a8b23f40122cf2ea3e5?default=blank&size=40lizrackster commented ago

Hey there, this is amazing - thanks to everyone who made this possible, I hope they work well once in a hospital context. Can we have the 3DS file please, as my printer is a small one I'm going to have to slice the model in half so I can print it. I will then have to use some very strong glue to fix it together.. . . . Unless this file already exists ? Thanks, Liz

3d0bd2c5602017b987f45cc117f56b07?default=blank&size=40Scott Jackson commented ago

Hello to anybody printing the North American version of this frame. I've created a small piece that can clip onto the forehead brace of the frame. It can either spread out the pressure, or have a 4" piece of 1/2" (12mm) foam tape attached to it. Takes under 5min to print at 0.3 layers with 0.6 nozzle and 0.8 line width. I've also created a template for a half sheet (4.25x11) transparency to use as a top cover. These are the two main concerns I see people voice about this design. Here are some solutions:

https://www.youmagine.com/designs/flat-comfort-band-for-3dverkstan-face-shield

Mini erik stickerErik Cederberg commented ago

@jason watson: What spacing between the different units would you need to get it well working in a resin jetting printer like the Objet? Is 1mm spacing good?

6fd26173aacc0ab71f3e9dd45547330f?default=blank&size=40andy_spoo commented ago

Anyone in the UK who has printed out any one these head bands that I can send a couple of laser cut shields to? I want to confirm they're accurate before I laser cut a load of them.

Many 3D printers have a small amount of variation. I want to check that they fit others and not just mine!

Thanks. Email me your address at amp3d@protonmail.com

3d0a9e203b463d97ffdc0730cff9e79e?default=blank&size=40jason watson commented ago

Hi Erik

AMAZING- been printing Prusa design which is great but slow- 4 hole punch UK fits the Euro one- the 4 hole cutting guide for laser printing a little out. But regular sheet paper cutter perfect. My problem is we cant stack in out OBJET- could you add a 5-10 stack for the euro 80mm PLEASE. The NHS needs you. Thank you so much from Nottingham University Hospitals Trust. Printing a few of the flat band editions to see what that is like. BW Jason Watson

7553d8e9aa02a36c569cd735cbdfa1ff?default=blank&size=40KrisG commented ago

I printed 3 EU versions on a Ultimaker 3 with a 0.4mm nozzle (I think, printer is not mine).

They are usable but not really solid.

Lines are almost coming loose, not really, but it could be better.

I'm pretty new to 3D printing, could anyone tell me what settings to change to solve this for future prints ?

Ef7495415f990bdb32d3c3ebd89e6c15?default=blank&size=40erick commented ago

@danielottosen - Thanks for your help. I tried those exact settings and I'm still getting 1 hour. I'm not sure what is going wrong.

C5fc0e52c17c62033c191b6ec2f651a4?default=blank&size=40htaxil commented ago

I want to build a stacked version for the European model, can you share the CAD file, please?

1497a26e5feafe82951a1b088a76d17f?default=blank&size=40Tomáš Dulík commented ago

There a nice wikipedia page explaining the international punch hole standards: https://en.wikipedia.org/wiki/Hole_punch#Chart

A picture is worth thousand words :-) - could you link it from your "versions" page? https://3dverkstan.se/protective-visor/protective-visor-versions/

90490435862244300949fa484120b320?default=blank&size=40danielottosen commented ago

@erick, I print them (or the version i made for fitting into the Makerbot) on a Makerbot on low quality without supports or rafts, and with 10% infill, dual shell, 0.8mm roof and floor. It takes about 30 minutes

Mini alex lcna closeMagnolia Titanium commented ago

4 ppl with glasses https://www.youmagine.com/designs/open-source-protective-visor-by-magnoliatitanium

Mini alex lcna closeMagnolia Titanium commented ago

I have a model that increases the clearance for peoples glasses

792025aea059e958bb1f6979fbd1ccc0?default=blank&size=40Jeffrey Bedard printed this ago
Carousel thumb img 20200330 212806
Printed on:
Home made reprap
Result:
10 bands made so far, of the North American design. 3 shields cut after a couple hundred test holes. About to put it in full production on 6 machines.
Feedback:
A standard US hole puncher makes holes that are too small, so a version with smaller pegs would help. I used a 5W laser engraver to make the shields. I found that using a line of electrical tape on the acetate allows the laser's energy to focus on the work area for a clean cut. Cut at 50% power (2.5W), 200mm/min, 1 pass. It also serves to reinforce the holes.
Mini screen shot 2013 07 15 at 6.49.36 pmErik de Bruijn printed this ago
Carousel thumb img 20200329 131608
Printed on:
Ultimaker S5
Result:
We printed boxes full of them. The photo is already outdated. :)
Feedback:
We like the new European A4 version. Much easier to punch the holes now.
Ef7495415f990bdb32d3c3ebd89e6c15?default=blank&size=40erick commented ago

Thank you for sharing these files. Can anyone help with reliable print settings for MakerBot Replicator to cut down the print time? Currently at about 1 hour 30 minutes. I'm not familiar enough to tweak and get a solid result quicker.

Thanks for any help!

2a6c8ed879abe5c31c2e25a0c1467db9?default=blank&size=40Jose Pablo Quesada commented ago

Thank you Erik and @lcmyip. I'll keep you posted as this moves forward

7724d71ff218754b0beb26f3d899ba14?default=blank&size=40Steven Thompson commented ago

Why the PETG preference?

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

@Jose Pablo Quesada I emailed you my CAD file too but if Erik can provide

his, that's even better.

@SS0317 seems to work okay with PLA on initial testing, but haven't gone

further as we are recommending PETG. With PETG, the stacking completely

fails. Either too well bonded or not well enough.

7724d71ff218754b0beb26f3d899ba14?default=blank&size=40Steven Thompson commented ago

@Icmyip any luck with the 10 stack? A group of friends and business partners are going to be purchasing 10 or more printers to print these or a similar face shield design. If they can be stacked then we will purchase a different printer (CR10S Pro). If they can't we will go with the largest bed we can (CR10 S5). We would much rather have the automatic bed leveling if we are managing many printers... I'd prefer to run each printer with (2) 10 stacks on the bed. Software looks like 6-7 hours with the file you posted. Interested in which direction to go before we spend all of our money on a particular printer. Planning on printing with PLA. Thank You

Mini erik stickerErik Cederberg commented ago

@Jose Pablo Quesada, you got mail.

918aabb05e77cfa8e40d2a76a5168326?default=blank&size=40Travis Hardiman printed this ago
Carousel thumb faceshield
Printed on:
Creality CR-10S
Result:
Using SnoLabs Transparent-1.75-PETG, turned out great. 1st Layer Print Temp: 225°C Print Temp: 220°C Bed Temp: 80°C
Feedback:
I am trying a print right now with 2 models on the bed rotated 180 degrees and a bit offset from each other.
2a6c8ed879abe5c31c2e25a0c1467db9?default=blank&size=40Jose Pablo Quesada commented ago

Thanks @lcmyip . I do not run the facility, I'm hiring them to do it . They can work with STL but much rather get a CAD to understand dimensions and input into their machines. They will make the negative mold, Yes.... although I have no idea of costs yet. Can you send me the CAD to jpablo.quesada@gmail.com or jose.quesada@moduscreate.com ?

2a6c8ed879abe5c31c2e25a0c1467db9?default=blank&size=40Jose Pablo Quesada commented ago

Thanks @lcmyip . I do not run the facility, I'm hiring them to do it . They can work with STL but much rather get a CAD to understand dimensions and input into their machines. They will make the negative mold, Yes.... although I have no idea of costs yet. Can you send me the CAD to jpablo.quesada@gmail.com or jose.quesada@moduscreate.com ?

Fc57b34e7745f7be99dc7871e5fef1ae?default=blank&size=40Spencer Sellay added this to the Protective Visor With more room for mask collection ago
F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

@redheadmaker

I stacked a slightly different job that I'm doing right now in the same way

and printed 5-high overnight. Separately fairly well with PLA, although

print quality decreased and if I were to repeat, I would run the job

slower. I just joined @Petko Ganachev's Slack group based in BC and will

continue any work there.

@Jose Pablo Quesada

I have a CAD file I reverse-engineered from the STL. Do you run this

injection molding facility/would you be making the negative yourself?

Apologies about the weird formatting of my post. I'm no longer able to post

on the website and have to email in my replies (no idea why) and the

formatting is horrendous.

918aabb05e77cfa8e40d2a76a5168326?default=blank&size=40Travis Hardiman added this to the to make collection ago
2a6c8ed879abe5c31c2e25a0c1467db9?default=blank&size=40Jose Pablo Quesada commented ago

Hi. I'm trying to mass produce this in an injection molding facility. Any chance someone has a PDF plan with clear dimensions for everything or a CAD drawing too?

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

The Prusa stacked visors come out just fine. Maybe someone can look at how they stacked them. I printed their four stack - which is two and two. Can't believe how much longer and how much more filament that one takes.

Mini erik stickerErik Cederberg commented ago

@redheadmaker: The stacked file is specifically intended for Stratasys industrial printers that print ABS with soluble support materials. On most single material printers stacking does not produce good results.

6a5317c6f181d3410321af447f3830cd?default=blank&size=40starwin21 commented ago

I have had great success with the American version and am producing them for medical personnel now. I also would like help creating a stacked American version file so I can meet demand. Even if you don't want to do the work, if you could provide the original CAD I would gladly give it a shot. Thank you so much for your hard work!

0807e6ae0b0d07061581d4b70e6436a3?default=blank&size=40Jim Hildreth added this to the Medical collection ago
F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

That's disappointing! I modeled it same as the Prusa one but theirs might

have had thinner walls. I'll see tomorrow if mine worked. Otherwise I guess

it's incentive to add a second extruder and use HIPS or PVA...

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

The stack print doesn't work for me. I just used the bottom two on the stack and they pretty much came out fused together and when I chiseled them apart they are unusable. I guess for now I will stick with the two that are flat on the bed.

Mini rabidscallion facing right 800x800RabidScallion commented ago

@Andrew Normore Thanks so much for the guidance. Took my single print from 1.25 hrs down to 17 minutes. Also, Andrew is right, follow Erik's notes on printer settings. Using a 1.0 mm nozzle dramatic changed my print time and suffered very little in quality. Here is a run down on some basic settings in Cura that I've been using on my Ender 3 Pro 220x220 (no mods)

Cura defaults for the most part with the following changes

- No support

- 1.0mm nozzle

- 0.6 layer height

- 2.4 Wall thickness (2 lines)

- Concentric Top/Bottom pattern (thanks Andrew)

- Fill gaps everywhere (nominal time difference and fills holes)

- No infill

- 210 Default printing temp (gets worse with lower temps for me)

- Enable retraction with 8mm distance

- 80mm/s print speed / 40mm/s wall speed / 30mm/s initial

- Combing mode = All (helps with not having to clean up and no big change in time <1 min)

In the middle of trying out @Icmyip stack print. I'll update to see how I do but my white filement needs a higher temp for some reason.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

PETG is extremely sticky so I'm not surprised. I imagine it would work much

better with PLA. I'm going to try stacking a different model in a similar

way tonight.

https://www.dropbox.com/s/2bs03fsnyw0r17a/VisorFrameNORTHAMERICALETTER_v3.3-stack10-prusa.2.stl

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

Stacking didn't work with the PTEG filament I'm using at all, even using the model with a solid splash guard from our volunteer.

@redheadmaker make sure it works ok by printing the first 2 units in the stack then stopping the print before you leave it on over night to validate that it works with your printer and filament. would be a shame to waste a 1/4 of a roll of filament overnight.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Yes, I could slice this latest one. I will start it up before I go to bed. Thanks! I just gave 20 of these away to a firefighter friend of mine that said his house has 26 firefighters and only 6 face shields.

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

@icmyip

that version slices fine with no supports in prusaslicer 2.2.0.

I'm concerned about the bridging of the splash guard section however. The design our volunteer made turned that in to a solid section, only adds 2 grams of materials per frame, and still splits apart perfectly fine.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

@Petko Ganachev

Can you try this file?

https://www.dropbox.com/s/73a3gj07kurl9il/VisorFrameNORTHAMERICALETTER_v3.3-stack10prusa.stl?dl=0

I modeled the separation based on the Prusa RC3 stacked file you linked. Shouldn't need to enable supports for this. I did have to add some supporting cylinders in the forehead part of the model to support the next print. May end up actually being faster to make the entire forehead piece solid and hollow it out when slicing.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

That is ugly if I turn on supports. They aren't only in between. Prusa slicer supports are kind of a pain.

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

Icmyip

I was refering to the prusa RC3 stacked file. https://www.prusaprinters.org/prints/27267

PrusaSlicer will not slice the Stratasys stack that's on here without supports either.

6fd26173aacc0ab71f3e9dd45547330f?default=blank&size=40andy_spoo commented ago

I've re-created the Euro A4 DXF file so it now works well with the prints I've created. The screen still stays attached if the visor is used by someone with a larger than average head, or when someone with a small head uses it. Visor needs to be flexed open for the screen to be attached.

Tested using 0.1mm OHP film,.

File link here = https://yadi.sk/d/0g9Ck7VPj5UE6A

Hopefully someone else might find it useful.

Mini rabidscallion facing right 800x800RabidScallion commented ago

This is great! Have you tested yet? I'm curious about optimizing the

support and what settings you recommend.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

Which Prusa stack are you referring to? The only stack I found in the documents section was for the Stratasys.

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

Thank you Icmyip, I assumed you had it designed like the prusa stack with supports already built in.

will try once my current print is done. Slices fine with supports.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

The empty layer is likely because the way the template I followed (Swedish/Stratasys file) connected each model to the others was using a narrow 0.2 mm rod going through all the models. Would be interesting if Slicer/PrusaSlicer has the same error with that file. This is likely unprintable for most printers hence the error with the slicing software finding an empty layer. I assume you would use support material between the layers though? I can redo it using a wider diameter rod if that would help.

To be honest, I'm unlikely to use these stacked models myself in the near future but I don't mind doing the CAD work if needed.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

Do you have supports enabled? It slices fine using Cura.

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

lcmyip's design gives an empty layer error in PrusaSlicer, any way to get around that?

Also, one of our members created this design, same issue however should be easier to print since the splash shield will have some support when printing the next one. it printed very well for the person that posted it. (scale to 10% of original size to print correct dimentions.

https://www.dropbox.com/s/3hfuudkveahqxe7/double%20stack%203dverkstan%20frames.obj?dl=0

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

My printer is currently occupied by another PPE project so I haven't tested

the stack. I made it based on the Swedish/Stratasys printer version, but

using my chamfered model instead of the original v.3 provided here.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Slicer won't slice the stacked file with 10, here is the error message:

Empty layers detected, the output would not be printable.

Object name: VisorFrameNORTHAMERICALETTER_v3.3-stack10.stl

Print z: 6.500000

This is usually caused by negligibly small extrusions or by a faulty model. Try to repair the model or change its orientation on the bed.

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Have you tried the stacked ones yet? How do they come apart? Do you end up needing to sand them?

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

I didn't feel like waiting for the CAD models so I did it myself. Here's the link to my version of the NA files.

Chamfered on both sides, and stacked x10, x20 and x30.

https://www.dropbox.com/sh/6qh0cvpbu5b9mfu/AADShdUqClApT7OgUqlturyca?dl=0

Mini rabidscallion facing right 800x800RabidScallion commented ago

I'd LOOOOOVVEEEE to see a stacked version. It would be great to have

someone figure this out. I'm babysitting my printer every 20 minutes to

take one of the bed and get the other one printing. On another note though,

I'd also like to see easy cleanup. Printing one a time makes it nice

because I have little to no cleanup. Hopefully you guys can figure this out

soon. I have one maybe two more printers on the way where I can print three

on the same bed so if they're stacked even better so the bed & nozzle heat

up time wont be a factor.

F7dde25ed46625b0a2720ac55e3b263d?default=blank&size=40lcmyip commented ago

This is great! Our prototyping lab has been printing various designs and seeing what would be most feasible. I like this one due to how fast it is to print and requiring only two parts.

Any chance the CAD file would be available? I notice at least on the North America version that it is chamfered on one side only. If I had the CAD file I could easily chamfer the other, and also help make stacked versions if needed. I can reverse-engineer the file using the STL, but it's unnecessarily complex....

6fd26173aacc0ab71f3e9dd45547330f?default=blank&size=40andy_spoo commented ago

I think those DXF files are wrong.

My second printer/bed isn't large enough to print a whole face guard but I've cut the STL so I can compare the distance between the pins/holes and both printer produce holes/pins that are exactly the same, but neither coincides with the DXF file cut on my laser cutter. The laser is conformed as being calibrated correctly, so my conclusion is the DXF files are incorrect.

I've tried both the Europe ISO and non ISO A4 files, neither are correct.

E126a80529a0c04ef968c1be760f4f45?default=blank&size=40Pete Snell (Wrenchspinner) commented ago

+1 on a request for a stacked version of the NA model (Ultimaker 2 &3 Printer), and on the request for a solidworks file.

Pete

3d0bd2c5602017b987f45cc117f56b07?default=blank&size=40Scott Jackson commented ago

Erik! I made a small band that snaps onto the forehead rest of the frame. It only adds 5 minutes and 2-3 grams of material per print. It's helpful for people that need to use a rubberband to keep the visor on their head. I've sized it to use 1/2 inch or 12mm high density foam tape.

https://www.youmagine.com/designs/flat-comfort-band-for-erik-cederberg-s-face-shield

C5e675414922a419141f274793b09015?default=blank&size=40Petko Ganachev commented ago

We are printing these in British Columbia Canada for our medical professionals. Working on getting Health Authority Approval.

One of our volunteers has successfully printed 2 of them stacked. Will share here once we confirm with a few printers that it works for sure. Pictures looked good.

This is our current most optimized print settings for Prusa Printers. 2 units printed in 53 minutes with a 0.4mm nozzle: https://slack-files.com/T010V0KE0DT-F010ZSC8EVB-eadb04c9b4

You can find our group at https://help.colors3d.com

81ee881d8250fb01d80220cec25ab311?default=blank&size=40Joseph Coleno commented ago

As far as this comment can be useful to those who have chosen to print the Europe version and the template corresponding to the 4 fixing pins. Using the punch, position the template in question printed for a test and justapose it on the plastic sheet. Once the perforation is made, the plastic sheet is well positioned on the frame.

9a4a91b3b7311724ccdceee298aba643?default=blank&size=40Phil Kent (Aquariums To Go) commented ago

I have the same issue with using a handheld hole punch. I’m planning on making my own template tommorow if a correct one isn’t available.

6fd26173aacc0ab71f3e9dd45547330f?default=blank&size=40andy_spoo commented ago

I've tried the Swedish version with Swedish STL files and Swedish A4 dxf laser file and the holes in the shield aren't ligning up with headband. I've ran wide calibration tests on both my laser and 3D printer and they're calibrated just fine.

Are their original model files rather than STL files available to download so I can check what the accurate distances of the pegs on the model should be so I can work this out??

Thanks,

Andy

B7252a6c57281ffaa7ebba99467d272a?default=blank&size=40Theo Peïs printed this ago
Carousel thumb img 20200329 123226
Printed on:
Creality CR-10
Result:
perfect! tks
Feedback:
Tks tks tks for thank you for the french caregivers
Dea2b70fc9170bede0ec2d883d2763c4?default=blank&size=40LisaB2020 commented ago

Hi. Earlier someone asked about a version that can be printed on a smaller printer (FlashForge Finder). I'm a total novice at 3d printing, but have my child's printer and a ton of filament. I'd love to make something to protect my colleagues in healthcare. If there is a model I can make, I'd be very appreciative of that AND someone telling me all of the exact steps. I'd be happy to have someone talk me through the first one. Thanks!

Fa04f9e01db6420132140e458353a822?default=blank&size=40redheadmaker commented ago

Does anyone have a stacked version of the U.S. visor?

34151d5300edbc8de56a7372ac978d5a?default=blank&size=40Penjim printed this ago
Carousel thumb 4d7740db a5d0 4c76 8215 2e2eeb1e6c63
Printed on:
prusa mk3
Result:
Excellent- I printed at .30mm ht. with 2 on the print bed. Took -hr 37 min. I increased the no of wall layers so there was no hatching on the arms. Making these for trial for a local medical office.
Feedback:
I’m going to print some snap on grommets to go over the studs on the outside so the clear shield won’t pop off.
421592b0c5abe26b6e8e00bb9851493e?default=blank&size=40Billy de Mulder commented ago

On Sun, 29 Mar 2020 at 2:36 PM, YouMagine - Supercomputer <

supercomputer@youmagine.com> wrote:

Hi,

Penjim joined the conversation on Protective Visor by 3DVerkstan:

“ I have a .3mf file and gcode file for the Prusa MK3s, using generic

PETG. It prints 2 mask holders on the print bed at .30 height in 1 hour 37

minutes. Any use to anybody? ”

could I have that please? I’m printing PLA but a temp change is easy

Cheers

Billy

Click to see the discussion...

https://www.youmagine.com/designs/protective-visor-by-3dverkstan#activity--comment-create--14529

or post your comment by hitting "Reply"!

34151d5300edbc8de56a7372ac978d5a?default=blank&size=40Penjim commented ago

Sorry, post should have read:

I have a .3mf file and gcode file for the Prusa MK3s, using generic PETG. It prints 2 mask holders on the print bed at .30 height in 1 hour 37 minutes. This is for the North America 6 hole version (punched twice with a 3 hole punch). Any use to anybody?

34151d5300edbc8de56a7372ac978d5a?default=blank&size=40Penjim commented ago

I have a .3mf file and gcode file for the Prusa MK3s, using generic PETG. It prints 2 mask holders on the print bed at .30 height in 1 hour 37 minutes. Any use to anybody?

Fe1ca08c08df17e4bcc04ee451783a19?default=blank&size=40Kevin Loeffler commented ago

Hi Erik, awesome design! I don't have a 3D printer big enough to print it, so I made a derived design (with credit to you of course) that can be made on 3D carving machines and published it to Inventables: https://www.inventables.com/projects/covid-19-protective-visor

I made it with a sheet of 1/4" thick MDF and it works beautifully! It carves in 11 minutes.

E3c365ded3a7ed233710578be3ca8d9e?default=blank&size=40luis71manuel commented ago

hi Erik, this is great thanks. one comment/request, i want to help however my printer bed is small. i have a Flashforge Finder with a bed size of 6x6 inches so your design will not fit. i am not very proficient at designing in 3D and i wonder if you or someone in the community can design something for smaller printers. something with a hinge on the edges of the side where the last hole punch is?

thanks,

Luis

Mini rabidscallion facing right 800x800RabidScallion commented ago

Absolutely! You deserve it!!!

6ea44597ddb8b9663bb5d9cacd89c535?default=blank&size=40Rodolphe commented ago

Merci pour avoir partagé vos fichiers et le travail fourni, je viens d'en imprimer un pour test.

C'est sur que c'est rapide à imprimer, il est facile de changer la visière avec peu de matériel, le seul souci c'est qu'il est un peu trop près du visage lors du port d'un masque de protection et ça vient le toucher donc pas utilisable dans ces conditions, mais il y a surement d'autres façons de s'en servir.

Mini logogbClaymore added this to the covid collection ago
Ac8409c4f31644be31ac1c30ee608b62?default=blank&size=40Zubrycki Igor added this to the basics collection ago
8a0873862a4003428aeed6014d59e942?default=blank&size=40Magnus3d added this to the Covid collection ago
Mini erik stickerErik Cederberg commented ago

Hi RabidScallion, thanks for the kind words.

I do not require you to include a specific PDF, but if you do include some kind of documentation, a attribution to "Erik Cederberg / 3DVerkstan" and a link to Faceshield.nu is appreciated.

C913fa36799f18228b703be91e002c1e?default=blank&size=40wizard04 added this to the To Print collection ago
Mini rabidscallion facing right 800x800RabidScallion commented ago

THANK YOU SO VERY MUCH. What a great, light weight and comfortable design. Very fast compared to a lot of other designs. You should be proud. I want to circulate these to medical staff as soon as possible but want to make sure I respect your licensing and efforts. Do you require us to include the ReadMe.PDF when packaging to hospitals? These will all be donations.

Mini erik stickerErik Cederberg commented ago

@Tim: Hi, the closed top is a requirement for many hospitals over here, they will not accept a fully open top since it compromises the protection from drops from above.

A bit further spacing is a possibility we are looking into.

83cac326cb202ccdde2eebdecce3bb21?default=blank&size=40Tim commented ago

Compared to the Prusa design, I like how much faster this prints and how much less material it uses. I think the shield is held more securely too (NA letter design).

However, the closed top really does not ventilate well. The mask fogs easily and I find I am re-breathing warm air. It is also is too close to my nose. The Prusa has much more generous gap.

Is it not possible to space the top farther away and provide some more ventilation?

Mini erik stickerErik Cederberg commented ago

@HichamB: we currently decided against this due to the substantial improvement to printing time, but please do them like that if you like.

4478166ac96c1eeb050858430c8df18f?default=blank&size=40HichamB commented ago

Hello,

Here they are D-Blaylock

VisorFrameNORTHAMERICALETTERv2

https://drive.google.com/open?id=1KXC6MEWNTExIrGOWBFhlwcWhXNdtHM-q

VisorFrameNORTHAMERICALETTERv3

https://drive.google.com/open?id=1b6fpe0YbzaQ_nZJOD9-cGXWq5zwgGiLG

81ee881d8250fb01d80220cec25ab311?default=blank&size=40Joseph Coleno commented ago

Hello makers,

Any verified profile or presliced files list as said on the print guide (https://3dverkstan.se/protective-visor/protective-visor-print-guide/).

Thanks and tumbs up for this project.

5ec178e5471a8297bb4d3665218723ac?default=blank&size=40D Blaylock commented ago

Erik this is a great design!!!

HichamB could you please make the North American versions solid?

4478166ac96c1eeb050858430c8df18f?default=blank&size=40HichamB commented ago

Hello and Thank you Erik,

I made a slight modification to your design; I think that this way it can be cleaned easily.

Here are the links to the stl file (european model) and the preview: (I could do the rest of the files if someone needed them)

https://drive.google.com/open?id=1zX4jqNsRVS81egxFyISfckddf6FVlTjY

https://drive.google.com/open?id=14H9qQHLupHXB7ypfV7v-p_gWYd1JeMA1

Stay safe

Mini erik stickerErik Cederberg commented ago

I have deleted all the templates and reuploaded them with more consistent naming convention, also added templates for Europeean ISO838 and 4-hole versions.

F4a3be1e4dd691dfab0cf040b37cd069?default=blank&size=40Chunky Fen added this to the mask collection ago
9a4a91b3b7311724ccdceee298aba643?default=blank&size=40Phil Kent (Aquariums To Go) commented ago

Also looking for the European holes template...I can be a bit daft, but I can't find it.

I think I need the European version for Australia.

9a4a91b3b7311724ccdceee298aba643?default=blank&size=40Phil Kent (Aquariums To Go) commented ago

Also looking for the European holes template...I can be a bit daft, but I can't find it.

I think I need the European version for Australia.

Mini screen shot 2013 07 15 at 6.49.36 pmErik de Bruijn added this to the Performance test collection ago
Fe51c0c47189f761bcbe24dacd1e08c9?default=blank&size=40William Neal commented ago

Thank you @t1937r0 do you think you can make one for VisorframeSWEDEN_v10 as well please?? Thank you!!!!

38b084703fd4c779f88af01e6ccd0fb7?default=blank&size=40Andrew Normore commented ago

FOLLOW THE PRINT INSTRUCTIONS PEOPLE. I am brand new to 3d printing, my prints are coming out every 30 minutes. PERFECT. Read their very detailed instructions guys -- I am now circulating these to my local township!

421592b0c5abe26b6e8e00bb9851493e?default=blank&size=40Billy de Mulder commented ago

Has anyone sliced this in Prusaslicer? I tried to slice this with the recommeded settings as per the article although I can't seem to make it solid using only perimeters. There is always a gap in the middle, unless I use 100% infil. If anyone has a profile for the mk3s (0.4mm nozzle) without infil let me know. thanks.

Mini erik stickerErik Cederberg commented ago

New version for Europeean 4-hole version + multiple templates added.

1daf44254122d8bed920a3d5cdd5b0a3?default=blank&size=40Dalfandor commented ago

Here is a pdf to act as a guide for the hole punching for the Northamerican 6 hole version

https://drive.google.com/file/d/1RCuwbUxHPLNzBuBiJ18FT4Qqkf9k04aT/view?usp=sharing

De2712265fd42c71981ad0ad7fee7fd3?default=blank&size=40Adam Bacik commented ago

If you have a dual nozzle printer then you can place one on top of another with just enough of a gap for a thin layer of soluble support

110a501bd7ce60598486c4b61d0c54d5?default=blank&size=40Patrick Eells commented ago

I agree @Andrew Normore I need to figure out a stackable print situation. It's really slowing us down to have to start a print every hour.

3c5dd6e7c1b341cab433cb63764de20f?default=blank&size=40Arkemist commented ago

How smooth should the surfaces be? I printed couple of them above each other with breakaway material as supports. It peeled away pretty neatly and the surfaces seem ok to me yet there is a noticeable difference compared to one layer printing. How do I know if I rather should stick to one layer printing?

F.

2951b4ad78b638d99ad1c0c1f33c2998?default=blank&size=40Thinkologist commented ago

I need to make some improvements to the frame, can have an editable file (DXF, sldprt...)?

4560970a79f190fe54c42f8a9db68023?default=blank&size=40t1937r0 commented ago

I've created a .dxf file and a .studio3 file (Silhouette Studio software for the Silhouette vinyl cutter) for the NA Letter size V3. You can find them at:

http://greynolds.us/FaceShield/

Note that this has 6 holes, which are elliptical (instead of circular) because that worked better for me. No guarantees it'll work for you, but it should.

Mini erik stickerErik Cederberg commented ago

@Andrew Normore: So far i have not seen any successful attempts at stacking, they all result in rough surfaces that is hard to clean and not suitable for disinfection. Printing a single layer is the optimal for print quality.

38b084703fd4c779f88af01e6ccd0fb7?default=blank&size=40Andrew Normore commented ago

Can we get instructions on how to make this STACKABLE for overnight print jobs? I'm still new to this :) but 2 printers just arrived and building now.

06e954124572d73da69a84afcfc9140e?default=blank&size=40DoctorRudd added this to the To Print collection ago
4aea84ab8edba506901d54e97758cdf9?default=blank&size=40Michael DeJong commented ago

As many other people previously said, there is no template for the V3 North American version. Can we get a DFX file for the latest NA V3 Letter version, please?

Mini erik stickerErik Cederberg commented ago

@Tombsology Confirmed. This distance between the center holes is what you get if you use a 80mm hole punch set to A6 and punch a A4 sheet from both sides.

See the instructions here:

https://3dverkstan.se/protective-visor/protective-visor-versions/

Mini catTombsology commented ago

I printed off the Visor Frame Europe Iso838 V3 but the front hole centres did not print at 80mm centres, more like 68mm centres. However, the hole centres from either front hole to the side holes are correct at 80mm. I am using a Tronxy-XY2-Pro.

Can anyone else confirm if the front hole centres are not 80mm apart please ?

Mini creative tools   logotype   color  800 x 800 pixels CreativeTools commented ago

@CreativeTools has donated and shipped 32+ kg of prime ECOrefill filament to FabLab Halmstad exclusively for protective visor manufacturing.

Mini erik stickerErik Cederberg commented ago

@Idus: Click this link in the description: https://3dverkstan.se/protective-visor/protective-visor-print-guide/

Mini erik stickerErik Cederberg commented ago

@Andrew Normore: the click-togheter solution has been discussed, a lot, and there are two problems.

1.) It introduces hard to disinfect cavities. The hospitals we talked to say this is a non-starter for them, they cannot have parts that have joints where they will not be sure that disinfectants will reach.

2.) It drastically increases the tolerance dependency, so makes it much harder to do a well working print, especially with larger nozzles.

Otherwise, i agree.

2c5bae7c73c4702108b96b79af282c51?default=blank&size=40Idus commented ago

This is just awesome! Doing my best to spread the word to friends and groups. Too bad I am home sick with influenza-like symptoms (not verified CAVID-19) - so does not meet the demands. :-(

However - looking through all the pages and files - I have not found a single notice on expected or recommended infill-percentage and parameters... Maybe write that under "Materials and methods" since it also effects your printing-time if you use too much!.

90490435862244300949fa484120b320?default=blank&size=40danielottosen commented ago

Smaller version for smaller printers:

I tried to print the Visor Frame Sweden V10 in an old Makerbot replicator, but print area was a little too small so I copied the idea creating an STL with max dimensions 178x139x5 mm. (The version is not as good as 3D verkstans since I'm a complete newbie at 3D design) Contact me for receiving the version for testing it out

Fedcd962e0861ea51a4d73864e34253a?default=blank&size=40Christian Laufs commented ago

Is there a hole layout for the european version with four holes?

So its easier to try out.

Fe51c0c47189f761bcbe24dacd1e08c9?default=blank&size=40William Neal commented ago

@Dalfandor Thank you. I am not good at editing but can you make that into a svg or dxf? Also if you can make it with round corners. Also if you can make one for VisorframeSWEDEN_v10

As I started to print that and the files included do not work for that one as well. I'm so close to just tossing all these and giving up at this point. Have about 20 :( no hole punch only using a cameo. Really appreciate it!

Bd1d299a5030cdca9d7a71f30fedb7c6?default=blank&size=40Lynn Hall added this to the Covid-19 collection ago
1daf44254122d8bed920a3d5cdd5b0a3?default=blank&size=40Dalfandor commented ago

Here is a link to a template I made for the NORTHAMERICANLETTER version.

Its just to act as set up page for your hole punch. Let me know if I can make life easier otherwise

https://drive.google.com/open?id=1RCuwbUxHPLNzBuBiJ18FT4Qqkf9k04aT

38b084703fd4c779f88af01e6ccd0fb7?default=blank&size=40Andrew Normore commented ago

Suggestion: Make the side pieces separate and click-together once printed. This would allow everyone with smaller printers to get started, and let bigger printers do more per run (overnight jobs).

38b084703fd4c779f88af01e6ccd0fb7?default=blank&size=40Andrew Normore commented ago

Cheers from Canada, I will printing 150 of these a day for our hospitals. Thank you so much for producing a fast printing, easy to assemble product. This is a blessing for our health care workers.

Fe51c0c47189f761bcbe24dacd1e08c9?default=blank&size=40William Neal commented ago

Well I printed a whole bunch of the VisorFrameNORTHAMERICALETTER_v3.stl

However none of the laser cut files fit this. Is there plans of creating a laser cut file for this?

F6ce583ce156d735e3c05ccea6f69ab6?default=blank&size=40free4ever commented ago

I like the idea posted earlier of printing several visors on top of each with supports as break away material. But I assume the design will have to modified to fill the tray area near the forehead. Or could supports be generated in the tray area, and hopefully bridging is sufficient for the bottom tray layer.

Also, what size is the hole for the US letter template? 6mm or 8mm?

Mini erik stickerErik Cederberg commented ago

@darksider63: a easy way to adjust it is to just dip the temples of the frame in hot water from a tea kettle and adjust to your liking. The fit will depend greatly on your head size and shape, so making a one-size fits all is very hard.

Mini erik stickerErik Cederberg commented ago

@Andreas: I have attached a job file above.

Um3 Cura Job Visor Frame Sweden V10.3MF

D93080823c4cd50aff4d78b80773a2d3?default=blank&size=40darksider63 commented ago

I don't know if my head is weird or what, but it hurts behind my ears because the frame is too much curved. Is it possible to make it more straight, like in eyeglasses? I will be adding a rubber band anyway. Thanks!

Eb180eceef6dc7cf3d4a085c953c4b24?default=blank&size=40Andreas commented ago

Sorry @Erik, I meant 3MF file (not STL) for Visor Frame Sweden - Ultimaker 3's with the 0.8mm core in my message below.

/Anrdreas

9cc1b114c88f15c89475f03ef9b03c1c?default=blank&size=40Henrik Cornelius commented ago

@Kim Nilsson

Please get in touch with us at 3DVerkstan and we'll help you out with a proper printer.

08 - 55 11 57 50 or info@3dverkstan.se

Eb180eceef6dc7cf3d4a085c953c4b24?default=blank&size=40Andreas commented ago

@Eric Cederberg

Could you possibly share the SLT that you mentioned that you use:

Visor Frame Sweden - Ultimaker 3's with the 0.8mm core.

(I suppose it does two at a time)

And possibly if you have, the same but for the 0.4 core as well.

Thank you.

Mini way of kingsNiehaun04 added this to the Covid collection ago
173dd3ac822c8aefc16601d0853aa113?default=blank&size=40Kim Nilsson commented ago

@Erik, thank you!

Mini erik stickerErik Cederberg commented ago

@Kim Nilsson: You need approx a 210x210mm build area to print two at a time, and about 160x190mm if you are OK with only doing one at a time.

At 3DVerkstan, we are producing these mostly with a number of Ultimaker 3's with the 0.8mm print core for faster printing: https://3dverkstan.se/ultimaker3/

173dd3ac822c8aefc16601d0853aa113?default=blank&size=40Kim Nilsson commented ago

What are the size requirements? I can't find that written anywhere, and I don't have a 3D-program yet that can tell me. I was just asked to help out picking a fitting 3D-printer to start producing visors here for our municipality in Sweden.

Mini erik stickerErik Cederberg commented ago

@Marius Muraru: You have mail

Mini erik stickerErik Cederberg commented ago

@sylexleola sylexleola No template needed, just take a A4 sheet and a regular europeean standard hole punch (2 holes, 80mm in between)

Aa89a6a50c13891395d4114adb83a842?default=blank&size=40sylexleola sylexleola commented ago

hi everybodies for the Visor Frame Europe Iso838 V3 Witch template for the hole I must print . I tried all but no one works. Thanks

3027c88fcfbf26be5ed42a4120d6024e?default=blank&size=40Marius Muraru commented ago

Hello Erik,

Could you please share an editable 3D model (CATpart, STP...)

We have Markforged Onyx One printers and I need to cut the part somehow to be printable.

Thank you,

Mini erik stickerErik Cederberg commented ago

@Gergely Filep We haven't seen any problems with this so far, but the feedback is noted and it might be included in the new revision i am working on.

Mini erik stickerErik Cederberg commented ago

@perflubron Suggestion noted, a new revision is in the works but lags a bit due to some regulatory troubles i have had to take care of here in Sweden.

Mini erik stickerErik Cederberg commented ago

@jymboche The north america frame is to be used with the spacer also provided and a regular 3-hole punch. The template file you looked at is to use a single hole punch to fit a letter sized sheet to the original Swedish version. I might need to clarify that.

Please see more information here: https://3dverkstan.se/protective-visor/protective-visor-versions/

Mini erik stickerErik Cederberg commented ago

@Jonas Bohlin You could probably just use two plane cuts and cut down the length of the pegs slightly to fit 155mm, try Meshmixer.

Mini erik stickerErik Cederberg commented ago

Hi @gmorain

The cleaning used here in Sweden is dunking in or wiping with a Isopropyl Alcohol (>70%) based disinfectant, and ABS is compatible a quick wipe or dunk, but not with extended times in the bath.

PLA and PET is both more resistant.

Mini erik stickerErik Cederberg commented ago

Hi @Arkemist.

If you can make the breakaway layer to come of smoothly and give good finish at both sides, it would absolutely make sense. I have not had time to try this myself yet.

3c5dd6e7c1b341cab433cb63764de20f?default=blank&size=40Arkemist commented ago

Hi Eric,

Wonderful work! Hope it gets approved by the authorities!

Would it make sense to print the visors in several layers on top of each other using breakaway material for support between the layers? This is to be able to leave the printer do its thing for longer and getting more visors in one go.

/F.

D0b5f3086aecf9ce8843ebfe1ed7cc78?default=blank&size=40gmorain commented ago

Hi Eric, thanks for sharing this, I am currently printing some for doctors around me (western city in France). I see it is currently being tested by a local hospital, do they have issues with other materials (I only have ABS here at home) ? I was wondering about the chemical properties vs medical cleaning process...

Gilles

8a80f0be40977c11a0216a68ec0ee45d?default=blank&size=40Jonas Bohlin commented ago

Great design! I tried to print this on my Flashforge Inventor, but turns out the prinbed is 155 mm wide. Is there any way to modify, to accomodate a narrower frame/sharper visor curve, or is that pointless?

Mini ymonmeow printed this ago
Carousel thumb 2020 03 24 08.11.49
Printed on:
Hypercube
Result:
Quick print in PETG
1f6d2fb797457fe74974dd6feb5d6bab?default=blank&size=40Jimmy Dahlström printed this ago
Carousel thumb protective visor v10
Printed on:
Creality CR-10
Result:
functional. 1 unit 1.5 hours, 3 units on the bed 4,5h.
1fcf827b80188a603d1a52b9c8f8c859?default=blank&size=40jymboche commented ago

I printed the visor frame north america letter v3, and the hole template letter, but the holes dont align, also I have 6 tabs on the print, but 8 holes in the letter template. Am i using the wrong letter template or has it not been updated? Thanks!!

F9177fb5c4b0d0eda64b8b380b8e4d40?default=blank&size=40perflubron commented ago

The screen touches my eyeglasses when mounted (testing with A4 paper). Front might need to be slightly wider, or altered as per Gergely's suggestion.

E99ea9641624a732ab08316ec3c36157?default=blank&size=40Gergely Filep commented ago

The Prusa RC2 model has 4cm. Thanks!

E99ea9641624a732ab08316ec3c36157?default=blank&size=40Gergely Filep commented ago

Nice design! Could you make a modification, so the shield - forhead distance will be enoguth to wear a FFP3 mask under it?

Mini ojo horus2 miniPilotDog added this to the Covid-19 collection ago
Mini screen shot 2013 07 15 at 6.49.36 pmErik de Bruijn commented ago

In response to the COVID19 pandemic, European Norms regarding face masks are now published free of charge. This link pertains to personal eye protection:

https://www.hzn.hr/UserDocsImages/pdf/HRN%20EN%20166_2002.pdf

Another tip in case of using this as a last-resort: PET bottle can also be a source of a fairly strong PET sheet! The curvature might not be idea, but thermal treatment could help there.

Mini screen shot 2013 07 15 at 6.49.36 pmErik de Bruijn printed this ago
Carousel thumb img 20200321 111508
Printed on:
Ultimaker S5
Result:
Prints fine. I'm adding my project file for 3x visor on one build bed of the UM S5.
Feedback:
I still need to get transparent screens, but it's relatively comfortable. The hospital says that the comfort is important and that it the nose bridge is what makes them uncomfortable, this design might actually avoid that problem altogether.
Mini screen shot 2013 07 15 at 6.49.36 pmErik de Bruijn added this to the COVID19 collection ago
Mini erik stickerErik Cederberg published this design ago