Thanks for downloading!
We'd love to hear from you if the print was successful.
Quadhands Helping Hands Tripod Mount Adapter
This is an adapter to turn a Quadhands Helping Hands workbench into a camera tripod for a Logitech C920 webcam.
Maker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
This is an adapter to turn a Quadhands Helping Hands workbench into a camera tripod for a Logitech C920 webcam.
To install, remove the alligator clamp from a 16" arm and screw the threaded stud into the small hole in the adapter. Screw the standard tripod screw on the other side into the camera. Be careful not to tighten too tightly or the screw may snap off. The cord can be secured to the arm with a twist tie. Attach the flexible arm to the steel base and adjust into desired position.
You can point the arm straight up with camera pointed towards you and use as a standard tripod. It can also be pointed straight down or at a side angle towards the workbench to record projects or use as a makeshift streaming rig. If you're filming the workbench you will need to diffuse the lighting somehow because of the shiny coating on the base.
Materials and methods
Printer: Einstart-S
Rafts: Yes
Supports: Yes
Resolution: 0.2
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.