Ultimaker 3/3 extended double spool holder

These part solve the issue with bigger spools that can't fit on the original holder

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Attribution

https://www.youmagine.com/designs/spool-holders-5f2983d9-aa6c-41fd-84a4-8a3e0497a39d

Description

I use 1KG spools and its doesn't fit on the original spool and it cause a failed print because the material will stop loading into the cores

Materials and methods

I use PLA for both parts with 0.2 layer high
Part 1: 20% infill with support
Part 2: 100% infill with support - Note: When you remove the support from part 2 please do it carefully because i broke my first test while i am taking the support of.

Documents

  • Span1
    Ultimaker 3 1 Kg Spool Holder Part 1
    STL  β€“  2 mb
    9:39 h  β€“  62 g  β€“  58×61×183 mm
  • Placeholder
    Ultimaker 3 1 Kg Spool Holder Part 1
    C4D  β€“  1.2 mb
  • Span1
    Ultimaker 3 1 Kg Spool Holder Part 2
    STL  β€“  340 kb
    2:55 h  β€“  16 g  β€“  60×176×70 mm
  • Placeholder
    Ultimaker 3 1 Kg Spool Holder Part 2
    C4D  β€“  480 kb
F78a556b8c4e10224de5fd90699f8d2e?default=blank&size=40waternut13134 commented ago

Works great,The only thing I see that can be improved is the 2 hooks on the holder where the guide attaches to,They are very thin. I had to glue mine back on. Other than that it works great! Thank you!

C3083c203f678b1676e40d91119c3907?default=blank&size=40Mazen Alkaderi published this design ago