Thanks for downloading!
We'd love to hear from you if the print was successful. If you like the design, please consider donating to the designer.Donate to UltiArjan
UM2+ Feeder bracket for the Ultimaker2 railsystem (U2RS)
bracket to mount the +feeder on the U2RS3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
In case you want to keep using the rail system (U2RS) and want to upgrade to the new + feeder I published a simple bracket.
Upgrading is pretty easy, specially when you reuse the feeder motor.
Get all parts for the feeder at your local distributor.
Your feeder motor needs to have the D-shaped axis to be able to reuse it.
- get the feeder parts at you local reseller.
- Print the bracket
- Mount the feeder (when you reuse it, you have to cut about 8mm off the axis off the old motor, or use a thicker mounting plate), you need 4x M3x10 to mount the motor
Upgrade the firmware to Tinker 16.03.1
Change the e steps from E282 to E564, with the fantastic @tinkergnome firmware you do this in preferences/motion settings.
link to rail system;
Materials and methods
PLAtec, ABS, XT
Issues are used to track todos, bugs or requests. To get started, you could create an issue.