This is version 2.0 of the 3D printed arcade joystick mechanism which requires four micro switches and a control panel to live in. I was not really happy with the spring part of the first version, it was hard to print and prone to break and probably would require flexible pla or similar to work properly so I went back to the drawing board and started again.
V.2 has been turned around with the balljoint being part of the base rather than the stem and a less tricky base with a more solid way to hold the switches.
There are hollow stem and balljoint variants if you want to pass cabling through, so the firesticks and Tron joysticks will work. It would be a squeeze to fit the Raptor's wiring though.
As I have changed to a less common 3D printer, I wil no longer be releasing a free Gcode version.
THE STL FILES FOR THIS DESIGN ARE AVAILABLE THROUGH MY PATREON & PATREON SHOP.
You could join up for a month and download the STL files for all my designs
or you can now buy bundles from my Patreon shop for $3
Please consider dropping by and having a look.
Thanks for your support.