Crawler G3308 Single Cab "Adventurer" - 1/10 RC body

2
0 0
Videos
Images
Documentation
Files

Information

Crawler G3308 Single Cab "Adventurer" - 1/10 RC body

By Ian Jim

Designed for medium-duty tasks, the G3308 is one of the more “lightweight” trucks in our range making it ideal for different configurations to perform different tasks. Also, because it’s not as heavy-duty as the other trucks it gains better off road capabilities, more below.


Intended to be used with a 420mm wheelbase but can also fit on a shorter wheelbase chassis even with the sideboard flatbed shown in the renderings and pictures. (Please note that the G3308 Single Cab does NOT include the sideboard flatbed. They are sold separately). 
Scale diagrams are shown for mock-up wheelbase setups.


The build was based on the SCX10 iii stretch and modified chassis recycled from Crawler Cat 1 “Mammoth”, which can be found here.


The G3308 looks best with 115mm tyres at 230mm tyre outer to outer width with the stock fenders. However a trimmed, high clearance fender is included which will allow up to 120mm tyres with a lowered (LCG) stance, and 125mm when raised. The high clearance version also looks great with a wider 240mm stance.

Body mounts for SCX10 iii are included. (Mounts for other chassis will need to be custom designed)
To enhance its off-road abilities further, custom “rock shield” chassis mounts are included. The purpose is to make the under cab as slippery as possible with the angled surfaces so the truck will slide along the rocks instead of getting caught. There’s also a normal version of the chassis mount that does not have the “rock shield” design.

To match the improved off-road parts, a compact bumper which is narrower in width and mounted higher up, is also included to improve approach and steering angle with less chance of tyre rub. The stock bumper can be used with smaller tyres for a slightly more stock factory look.

A detailed dashboard and 2 different styles of steering wheels are included for the interior.

 


This truck cab is packed with scale details and options, see below:

There are a few options for the cab parts to allow mounting an included snorkel.

Foldable double door mirrors are included so you can still have the scale realistic look without the worry of breaking them too easily. Wipers are also included!

Other than the stock fender and high clearance fenders, there are options to mount functional fender lights (3mm orange LED).

The radiator can be seen directly behind the front grille, which comes in 2 versions. Logo grille and non logo.

2 different types of bonnets are included with different profiles. One is fully smooth, and the other has debossed panels. Both have windshield wash sprayers designed.

The cab roof comes in 4 different versions. Either with or without the functional roof lights (3mm orange LED). Flat and rounded roofs are also included to tweak the look to your liking. (note: the rounded roof is difficult to print, therefore it is recommended to use the flat roof)

AheadRC

Ian Jim

@AheadRC

15 objects 1 Followers

Based in Hong Kong, we design scale accessories and body shells for RC crawlers. Enhance the looks of your beloved RC rig with our wide range of accessories!

You_
The new You_ on mobile will come later this year.


Enjoy the RC community of 3D Creators and Drivers on desktop.


See You_ later!