Samson Go Mic Shock Mount

Simple shock mount for the Samson Go Mic


Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


This shock mount is designed to work with the Samson Go Mic, and if used with the shockmount_monitor_cup.stl file, it can clip onto a monitor stand with up to a 5cm outer diameter. If you'd like to clip the mount onto anything else, the included shockmount_hinge.dwg can be added into your design. The silicone tubing can be replaced by anything elastic with a 2mm OD, but I've found that it works well.
Printing with supports is recommended, and cleaning of the holes is necessary to allow the nuts to seat properly and the tubing to slide easily.

Materials and methods

- 1 meter of 2mm OD silicone tubing
- 1 M3 6mm Bolt
- 1 M3 10mm Bolt
- 2 M3 Hex Nuts



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini rhondalillieRhondaLillie added this to the hi collection ago
59f69943093cc41c26cb0d717a574b0d?default=blank&size=40naschorr published this design ago